Turnigy 9x Transmitter & 3 Mode Auxiliary Switch for Different Flight Modes with APM 2.5 Quadcopter
I purchased my Turnigy 9X from eBay so be sure to check there: http://fave.co/UpCACF
I've received several requests about configuring the Turnigy 9X 3-way auxiliary switch to control different flight modes. This video shows how to set this up with my APM 2.5 quadcopter, but it should be fairly similar for the DJI Naza.
This was an experimental configuration that seems to be working fairly well. The key is to map channel 6 on your Turnigy receiver to port 5 on your APM board. The video demonstrates the setup.
Let me know if you have any questions or comments and I hope this helps!
Видео Turnigy 9x Transmitter & 3 Mode Auxiliary Switch for Different Flight Modes with APM 2.5 Quadcopter канала Dennis Baldwin
I've received several requests about configuring the Turnigy 9X 3-way auxiliary switch to control different flight modes. This video shows how to set this up with my APM 2.5 quadcopter, but it should be fairly similar for the DJI Naza.
This was an experimental configuration that seems to be working fairly well. The key is to map channel 6 on your Turnigy receiver to port 5 on your APM board. The video demonstrates the setup.
Let me know if you have any questions or comments and I hope this helps!
Видео Turnigy 9x Transmitter & 3 Mode Auxiliary Switch for Different Flight Modes with APM 2.5 Quadcopter канала Dennis Baldwin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Phantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party AppsReversing Motor Rotation with Castle Creations Multirotor ESCs and Castle LinkDEXI Drone ARK Flow and IR Break Beam Bench/Flight TestYes My YouTube Account was Hijacked Today and My Sincere ApologyFireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2GPS Bus Tracking with Tufts UniversityMWC Flip 1.5 RTF and Updated Top Case Design3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler PlaneQAV 250 with Pixfalcon Telemetry and Guided Mode Using Tower for AndroidDroneBlocks with AirSim for Panorama SimulationAPM MinimOSD 3D Printed Case Available for Download on ThingiverseQAV400 / QAV500 3D Printed Landing Gear RevisitedPX4 with BeagleBone Indoor Position Flight with MAVSDK Drone ShowDroneMaps Part 107 Class B Airspace QuestionAPM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-PlaneiPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration ReductionDronePan 2.0 Beta with Support for Waypoints Using DJI SDK 4.2.23D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 2Recruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT NetworkNAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & FailsafeQAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight Modes