Heavy Metal Machining Part 1
This video is the first of new series involving the machining of a new gearbox shaft. The material is 9 1/2" 4140 by 62" Long.
To start with, I have to press the old shaft out of the gear. You'll see me set up on the press for some heating and press work first, then the removal of the second bearing. Later we'll move to the boring mill and lathe to start the machine work on the new material.
Follow along as we turn a raw piece of shafting into a functional part that will be used in heavy industry.
Видео Heavy Metal Machining Part 1 канала Abom79
To start with, I have to press the old shaft out of the gear. You'll see me set up on the press for some heating and press work first, then the removal of the second bearing. Later we'll move to the boring mill and lathe to start the machine work on the new material.
Follow along as we turn a raw piece of shafting into a functional part that will be used in heavy industry.
Видео Heavy Metal Machining Part 1 канала Abom79
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Heavy Metal Machining Part 2THE MAKING(English Version) (314)The Making of Steel BallsDurango & Silverton Railroad Machine Shop TourMost Satisfying with Modern Machine and Professional Workers Working Continuous High ProductiveKellogg Compressor Head RepairsMost SATISFYING Factory Machines And Ingenious ToolsMachining a Cast Iron Bearing70% of people do not know about this technology | Metal SpinningMachining and Welding Silicon Bronze repair Caterpillar Dozer track adjuster cylinder | Part 2Repair a Cracked Caterpillar 789 Dump Truck Suspension Part | Machining & WeldingSwedish Gearbox Shaft Part 4: Keyways & the Reveal!SNS 159 Part 2: Machining a Large Hydraulic Tube NutSNS 245: Machining Hydraulic Head PlateMachining a Gearbox ShaftMachining a PartAir Bearings: MachiningSNS 300: Spray Welding a Blower ShaftSNS 335: 2" Power Tapping with Flexarm GHM-60, Cast Iron Braze RepairSNS 210: Acme Nut Threading