Heavy Metal Machining Part 2
We continue on with the machining of the large gearbox shaft. This video will show all of the heavy turning, and finishing of the shaft in the American Pacemaker lathe.
I use the ISCAR LNMX tool for most of the rough turning, but also include some turning with an ISCAR COMG 643 turning tool. Material is 4140 heat treated and stress relieved.
This shaft goes into a large reducer.
My Shop Life t-shirts are on sale for a limited time right now over at Teeblaster: https://www.teeblaster.com/shoplifewelder
Видео Heavy Metal Machining Part 2 канала Abom79
I use the ISCAR LNMX tool for most of the rough turning, but also include some turning with an ISCAR COMG 643 turning tool. Material is 4140 heat treated and stress relieved.
This shaft goes into a large reducer.
My Shop Life t-shirts are on sale for a limited time right now over at Teeblaster: https://www.teeblaster.com/shoplifewelder
Видео Heavy Metal Machining Part 2 канала Abom79
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Heavy Metal Machining Part 3Repair DAMAGED Hydraulic Cylinder for CAT 651 Scraper | Part 1Broken & Siezed Bolt Removal, DR 650 Cylinder HeadSNS 183: Shaft Couplings Machined on the PacemakerMachining Skills on Manual Lathe Turning 4140 Hardened SteelTwin Blower Shaft Repair Part 3: Flame Spray Build-up, Turning & FinishingSNS 341: Machinist Jack Pattern for CastingWalker Turner Drilling Head Adaptor Part 2: Rotary Table Machining & FinishingSNS 302: Hardened Washers, Leather Apron, Machinery UpdatesSNS 300: Spray Welding a Blower ShaftMaking a BIG Hydraulic Cylinder Rod & Eye | Part 2SNS 204: Thread Repair Inserts, Boring Mill, Large Gearbox Build, G&E CatalogSNS 326: Stoker Engine Clean Up & Test Fit, Indicating Square Stock, Work Boot RepairSNS 309: Hydraulic Pump Motor AdaptorHeavy Metal Machining Part 1CAT D10 Dozer Cylinder Rebuild | Part 2 | Making the New BarrelSNS 286 Part 1: RV Cylinder Rebuild Completion3" Ball Hitch Insert Mods Part 19.5" Inch 4140 Gearbox Shaft Part 1