Repair a Cracked Caterpillar 789 Dump Truck Suspension Part | Machining & Welding
In this video we are machining and welding to repair a cracked Caterpillar 789 Dump Truck suspension part. This part is the top cap of the suspension Front Strut on the dump truck. There is a crack right through the weld joint holding the pin into the top cap and the pin has been damaged. To repair we need to machine out the damaged weld and pin before drilling, boring and weld prep machining the top cap to suit the new pin. We machine up a new pin using 150mm (6” inch) 4140 solid bar and then interference fit into the top cap before MIG welding with Hobart Fabco XL525 dual shield wire. The suspension part is then back in the lathe to finish machining the weld and pin down to size. We then drill and tap a 1" (inch) hole in the pin to complete.
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео Repair a Cracked Caterpillar 789 Dump Truck Suspension Part | Machining & Welding канала Cutting Edge Engineering Australia
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео Repair a Cracked Caterpillar 789 Dump Truck Suspension Part | Machining & Welding канала Cutting Edge Engineering Australia
Показать
Комментарии отсутствуют
Информация о видео
19 февраля 2021 г. 12:00:02
00:39:01
Другие видео канала
Repairing Blade on a Caterpillar 140M Motor Grader | FCAW WeldingLine boring and Bore welding Caterpillar D10 Dozer push arm | Sir Meccanica WS2Calcium chloride? No prb.. Tire fixing againRewinding Technique of Truck Starter Motor ArmatureOld Rifle RestorationMercedes AMG C43. The rear end rebuilding. Восстановление задней части.GMC Dump Truck | King Pin + Front Leaf Spring ReplacementNew truck braking in pakistan and rebuilding full videoMachining & Welding Road Milling Machine Hydraulic Cylinder barrel | TIG & MIGCracked Excavator Hydraulic Cylinder Weld Repair | Machining & WeldingDead Old Battery Cell Restoration | Impressive Technique and Skills | lead Acid Battery RestorationReplacing Damaged Hydraulic Cylinder Rod for Caterpillar D10 Bulldozer | Part 1Heavy Duty Machining 1000HP Tree Grinder Shaft | Part 2Line Boring & Bore Welding Caterpillar 730 Dump Truck A-frame Eye | Part 1 | Sir Meccanica WS2Line Boring & Bore Welding Caterpillar 730 Dump Truck A-frame Eye | Part 2 | Sir Meccanica WS2Machining Hydraulic Cylinder Barrel for CAT 651 Tractor Scraper | Part 1Heavy Duty Machining 1000HP Tree Grinder Shaft | Part 1Toyota 1C Engine Full Restoration (Toyota 1C 2C 3C Engine Restoration)Top Ten Tools I Use Every Day in the ShopSlotting Head For Milling Machine