Machining hydraulic cylinder barrel for CAT 651 Tractor Scraper | Part 1
This video is Part 1 of machining a new hydraulic cylinder barrel for a CAT 651 Scraper tractor bowl lift cylinder. In this part we started with the old hydraulic cylinder barrel and removed the cap end, flange head and trunnion mount ready for use on the new cylinder barrel. We used the horizontal bandsaw to cut off the barrel cap end before machining the cap for weld prep. The old barrel was setup in our TM-26120G lathe for machining out welds to remove the head flange and trunnion mount. The head flange and and trunnion mount were then heated with an acetylene torch to expand and remove from the old barrel. This didn't quite go to plan with the trunnion mount grabbing and we had to cut the steel barrel with a gas axe!
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео Machining hydraulic cylinder barrel for CAT 651 Tractor Scraper | Part 1 канала Cutting Edge Engineering Australia
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео Machining hydraulic cylinder barrel for CAT 651 Tractor Scraper | Part 1 канала Cutting Edge Engineering Australia
Показать
Комментарии отсутствуют
Информация о видео
4 сентября 2020 г. 12:00:01
00:11:24
Другие видео канала
Machining hydraulic cylinder barrel for CAT 651 Tractor Scraper | Part 2CAT Caterpillar 1700 LOADERS Damaged Dog Bone Part Repairs | Manual Milling Machining & WeldingWoodturning Nails?Line boring and Bore welding Caterpillar 775 Truck rear strut rod | Sir Meccanica WS2Turning Paper. Can It Hold Out?Trunnion mount for hydraulic cylinder10 meters heavy duty tube honing machineMachining and Vertical Honing a Caterpillar Dozer track adjuster cylinder | Part 1aquatherm prefabricationHydraulic cylinder breakdown pinWoops!! Excavator had a bad day!!Replacing eye on hydraulic cylinder for Caterpillar D9 Bulldozer | Machining, welding, millingMachining skills on manual lathe turning 4140 hardened steelHydraulic Cylinder Seal Kit Fitting 1Heavy duty machining large hydraulic cylinder rod for Hitachi mining excavator | Part 2Turning large EX2500 mining excavator hydraulic cylinder | Lathe machining & weldingTurning 4140 induction hardened chrome steel with Ceramic insert | Lathe machiningMachining and Welding Silicon Bronze repair Caterpillar Dozer track adjuster cylinder | Part 2Tom's Tips & Tricks #1 - Quick Part Alignment on the LatheHow does a cylinder work? Hydraulic and pneumatic - Pascal's law