Laser Y Axis Selector Relay - Rotary Axis & Gantry Axis

When you use a Rotary Attachment on your laser machine, it is a common requirement on many models opening the electrical enclosure, decoupling the Y Axis driver connection and replacing it with the Rotary Attachment connection. This will over time make the wiring connections fail, be weakening the wires in the connection and cause additional wear and tear on the stepper driver’s connections by the regular disconnect-reconnect procedure.
I will show you how to install a relay to enable switching between the two modes of Y Axis be achieved without this need to disconnect-reconnect? After installing a few components you’ll be able to easily switch from one Y Axis mode to the other without the need to open the side of the machine,

DOCUMENTAION can be found here. https://mwlaser.com.au/sdm_downloads/documentation-installation-of-a-y-axis-mode-selection-relay-switch/

The Parts I use are listed:
MY4NJ DC12V AC12V DC24V AC24V Coil 4NO 4NC Relay DIN Rail 14 Pin + Base Mini relay
https://s.click.aliexpress.com/e/_ApKP39

GEYA Guide Rail Aluminum Universal Type 35mm Slotted DIN Rail Long 10cm 20cm 30cm
https://s.click.aliexpress.com/e/_AC8cSr

1PC 12V-24V Heavy On Off Mini Small 2 Terminal SPST Toggle Switch Miniature With Waterproof Cover Rocker Switch
https://s.click.aliexpress.com/e/_AF5jg8

12mm Self-locking Waterproof Metal Push Button Switch LATCHING - LED 24V BLUE
https://s.click.aliexpress.com/e/_ADfYXD

18AWG 25m Flexible Silicone Wire 5 color rolls in box
https://s.click.aliexpress.com/e/_A1D2qP

800 Wire Crimping Tool Kit AWG 10-22 Terminal Connector Sleeves
https://s.click.aliexpress.com/e/_AUE0bv
In this video and documentation we are using the DC model (24V) 14Pin Relay Model MY4NJ with Relay Base Model PYF14A).

Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at MW Laser https://www.mwlaser.com.au
Instagram https://www.instagram.com/mattsworkshop_mwlaser/
Facebook https://www.facebook.com/groups/mwlaser

Show your support for MW Laser by Buying Matt a Coffee.
This can be done via our website https://www.buymeacoffee.com/mwlaser

NOTE: This is not a paid production or advertisement.

Видео Laser Y Axis Selector Relay - Rotary Axis & Gantry Axis канала MW Laser