LiFePo4 and Absorption. What I learned from my previous mistakes...

So this is a bit of a long story. I had some problems re-charging the battery after the last discharge. When it got fuller, some of the cells peaked and I had to manually discharge them. The more cells peaked, the more I struggled to keep the situation under control. At some point I turned charging off as I could not handle it any more. I'm not sure why the cells were so mis-balanced from the initial top balancing...

Well, I found another method online how to balance the cells without disassembling the whole pack again. So, that's what I did the whole week long. It took a while and I learned a lot about how these cells work and behave. It is all about the voltage and current. I was so wrong by just looking at the voltage...

Will the battery work after this crazy balancing procedure?

New XiaoXiang App:
https://off-grid-garage.com/battery-management-systems-bms/

Please subscribe and join me on my journey of the Off-Grid Garage!

For more information, please check out my website with links to all materials, devices and products: https://off-grid-garage.com

EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
Batteries, chargers and accessories: https://off-grid-garage.com/batteries-3/
Cables, inverters and electronics: https://off-grid-garage.com/electronics/
Tools, analysers and testers: https://off-grid-garage.com/equipment/

Видео LiFePo4 and Absorption. What I learned from my previous mistakes... канала Off-Grid Garage