Using default LiFePO4 settings for Bulk, Absorption and Float? Probably not...
I'm playing around with these settings for a while and observe how the charge controller handles different situations. When does it stop charging, when does it start charging again? What's the 'best' for Bulk, Absorption and Float mode? What Absorption Time and Tail Current works well...
This is so confusing for beginners (like me) so I really break this down as much as possible to understand what happens and why.
I don't like the default settings in the Victron charge controller for LiFePO4 cells. They seem to waste a lot of solar energy by not turning the charger back on quick enough.
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all materials, devices and products: https://off-grid-garage.com
EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
Batteries, chargers and accessories: https://off-grid-garage.com/batteries-3/
Cables, inverters and electronics: https://off-grid-garage.com/electronics/
Tools, analysers and testers: https://off-grid-garage.com/equipment/
Видео Using default LiFePO4 settings for Bulk, Absorption and Float? Probably not... канала Off-Grid Garage
This is so confusing for beginners (like me) so I really break this down as much as possible to understand what happens and why.
I don't like the default settings in the Victron charge controller for LiFePO4 cells. They seem to waste a lot of solar energy by not turning the charger back on quick enough.
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all materials, devices and products: https://off-grid-garage.com
EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
Batteries, chargers and accessories: https://off-grid-garage.com/batteries-3/
Cables, inverters and electronics: https://off-grid-garage.com/electronics/
Tools, analysers and testers: https://off-grid-garage.com/equipment/
Видео Using default LiFePO4 settings for Bulk, Absorption and Float? Probably not... канала Off-Grid Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Testing the difference of charging to 3.4V and 3.5V with and without Absorption.Battery Charging Cycle: Bulk // Absorption // Float // Equalization ChargeHow to Program a Solar Charge Controller in a DIY Camper Electrical SystemAliexpress $280 120Ah 12V LiitoKala LiFePO4 BatteryLithium Battery Longevity: Double or Quadruple the Life of Your Lithium BatteryLiFePo4 and Absorption. What I learned from my previous mistakes...Growatt 3000 24 Volt Settings For Lifepo4Lithium Cells in Float Charge. Will it destroy your battery?Very Detailed Beginners Guide To Building A Custom DIY LiFePO4 BatteryCan the active balancer save this battery? Impressive result!EPEVER 40amp charge controller now has LiFePO4 settings installed! Yeah man!LITHIUM BATTERY STORAGE PROFILE - Using Victron smart charge controllerVan Life Lithium Battery Heater | Simple Cheap SolutionHow to Set Your Inverter/Charger for Lithium Ion Batteries FT: Full Moon Adventure ClubGlobal Power LiFePo4 Battery Review and Tear Down - 100AH 12 VoltBattle Born 12v Battery Charge Settings for Maximum PerformanceHow to Top Balance LiFePO4 Battery Cells Quickly (and when you need to do it)How far to charge and discharge a LiFePO4 cell. Testing the full Charge and Discharge Curves.What is the best MAX charge voltage for LiFePo4? Tested!