How to Scale a Sensor and Create a Custom Probe
This video explains how to convert sensor voltage into the engineering unit that corresponds with what you are measuring. This is a skill that is used frequently when instrumenting a vehicle and is important if you want your data to be reported in a readable format.
Видео How to Scale a Sensor and Create a Custom Probe канала Justin Miller
Видео How to Scale a Sensor and Create a Custom Probe канала Justin Miller
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Testing a Charging System With a Carbon-Pile Load Tester
Testing a Battery With a Carbon-Pile Load Tester
Don't Throw Your Thermocouple Away!
How Electronic Throttle Actuators Work
Can I Reuse My Engine Bolts?
Finding CAN Bus Signal Errors
Accurately Diagnosing a Mass Airflow Sensor
Overlaying Multiple Waveforms on the PicoScope (Reference Waveforms)
Using Triggers to Capture Better Waveforms
Fixing Pixelated Waveforms
Understanding and Optimizing Sample Rates
The 4 Steps to Set Up a Lab Scope
Computer Outputs: High-Side and Low-Side Drivers
Computer Inputs: Pull-Up and Pull-Down Circuits
Measuring RPM with PicoScope 6 Software
Measuring Frequency, Duty Cycle, & Pulse Width
Using the PicoScope Built-in Waveform Generator
How to create a 1000 amp current probe in your PicoScope
Subaru P2021 Tumble Generator Valve Position Sensor Low Voltage - Sensor Installed Incorrectly
Intro to Pico NVH Diagnostics