Parameter settings and bleeding out heat exchanger and pump on a Rinnai RUR unit.

Here is part three on the Rinnai RUR unites. This is probably the most important part of the installation since its designed to let the tankless operate in its designed manner.
See page 50 in the installation manual for the parameter settings.
You should check all settings to make sure all are correct.
The hose to bleed the tankless supplied fittings is 3/8" ID and can be purchased from Home DePote or Lowes if comes in 10' lengths.
The tool supply house I buy my German tools from is,
KCtools.com
If you have a question please e mail me at economyplmbg@aol.com
I hope you enjoy the video,
Mike
Use a licensed plumber that is a level 3 certified by Rinnai to install your unit and to follow all state and local codes and to obtain all necessary permits from you local building dept.

Видео Parameter settings and bleeding out heat exchanger and pump on a Rinnai RUR unit. канала The Rinnai Guy