How to Change Lanes & Judge a Safe Gap to Pass A Road Test

LEARN HOW TO CHANGE LANES TO PASS A ROAD TEST -- watch the video. Get ROAD TEST CHECKLIST: https://www.smartdrivetest.com/landing-pages/pass-road-test-checklist SUBSCRIBE TODAY! ► http://youtube.com/c/smartdrivetest

#defensivedriving #smartdrivetest #howtochangelaneswhiledriving

Pass Your Road Test First Time Coupon - youtube30

Click for COURSE - https://goo.gl/m8zBsR
"GUARANTEED Pass Your Road Test "First Time"

Get your convex mirrors - click the link below:
https://www.amazon.com/shop/smartdrivetest

Chapters:

0:00 Why You're Having Trouble
1:46 In the Vehicle
2:18 Signalling Correctly
2:55 Poor Traffic Conditions
3:30 Don't Signal in Intersection
4:13 Changing Lanes Correctly
4:35 Turning Left Correctly
6:12 Turn Left; Move Right
7:10 Changing Lanes to Left
7:33 Multi-Lane Left Turn
8:12 Following Distance & Backing Off
9:42 Traffic Light Safety Zone
10:02 Solid White Lines
10:42 Lane Change Right
11:36 Semi-Truck Changes Lanes
12:25 Advanced Driving Tip
12:41 Move Around Slow Vehicle
13:17 Goofball Driver
13:40 Maintaining Speed
14:20 Highway - Vehicle Pulled Off
15:16 Highway Traffic Light
16:10 Highway - Pulling Onto
16:34 Highway - Changing Lanes
16:45 Driver's Test Requirement
17:21 Post-License Lane Change
17:42 Cruise Control
18:25 Approaching Red Light Correctly
18:57 Merging Vehicle
19:18 Changing Lane Highway
20:00 Traffic Flow & Tolerances
20:37 Lane Change
21:09 Lane Change
21:33 Left Turn; Complex Intersection
22:23 Key Driving Points
22:56 Convex Mirrors
23:31 Question: Do you have trouble changing lanes?
24:00 Online Driver Education Courses
24:35 Bloopers

The cornerstone of changing lanes safely and properly is to communicate your intention.

And remember, "signals are to tell other drivers that you wish to move over, not that you are moving over!"

Too many drivers fail to ask other drivers via their signals to help make a gap for them to merge and change lanes effectively.

If other drivers are asked and you give them time to react and respond, most of the time she/he will slow and make a space into which you can merge.

For the purposes of a road test and for safety, you must have 3 flashes on the signal before changing lanes.

The purpose of the the 3 signals is:

1) the first signal gets the attention of the other driver;
2) the second signal allows the other driver to locate your vehicle;
3) the other driver takes appropriate action.

In tandem with communication, you have to observe.

Before moving your vehicle laterally, ensure that you shoulder (head) check, and after the 3 flashes have completed and immediately before moving the vehicle shoulder check again.

And ensure that you leave your signal on until you are completely in the lane into which you are moving.
Good luck on your road test.
***************
www.smartdrivetest.com
www.facebook.com/smartdrivetest
www.twitter.com/smartdrivetest
www.instagram.com/smartdrivetest/

Music: BoxCat Games
Nameless: The Hackers RPG Soundtrack - Epic Song

Видео How to Change Lanes & Judge a Safe Gap to Pass A Road Test канала Smart Drive Test