3D printed Polish Enigma machine update

An update on the Enigma machine. I have successfully used the flat rivets to wire up the entry wheel and I have finished wiring up the plug board. I am now wiring between the plugboard, keyboard and map board but have run out of wire so need to order more. I suspect I will need to change the rotor moving mechanism as I think with the rotor stack in place there will be too much friction for the rotors to rotate on a keypress. But I can look at redesigning that later. With the pogo pins working in the reflector and the rivets working on the entry wheel I can be confident the rotors, which use both, should work.

Видео 3D printed Polish Enigma machine update канала asciimation