Hobby King DIY Print-rite 3D heated bed install part 1/3

In part one of this video series I am going over all the parts and what you are going to need to install the heated bed. There are links to the parts down below. Before you buy double check the specs and ratings. Most of the parts I already had or got from a hardware store.

Supplies
3D Printer of course
International - http://www.hobbyking.com/hobbyking/store/__80451__Print_Rite_DIY_3D_Printer_US_Plug.html
US - http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=80452
4 Springs - http://www.amazon.com/Prime-Line-Products-SP-9700-Compression/dp/B008RFGNGA/ref=sr_1_10?s=industrial&ie=UTF8&qid=1459089338&sr=1-10&keywords=springs
4 machine screw 1 ¼ in. and 4 bolts 3m size
Wire(multi-gauge)
Power supply 250 watts or more
Option 1- http://www.amazon.com/IN-WIN-Development-IP-S350T1-0-ATX12V-Supply/dp/B007I55JVK/ref=sr_1_6?s=pc&ie=UTF8&qid=1459090182&sr=1-6&keywords=computer+power+supply&refinements=p_n_feature_keywords_two_browse-bin%3A6906982011
Option 2 - http://www.amazon.com/eTopxizu-Universal-Regulated-Switching-Computer/dp/B00D7CWSCG/ref=sr_1_9?s=pc&ie=UTF8&qid=1459090182&sr=1-9&keywords=computer+power+supply&refinements=p_n_feature_keywords_two_browse-bin%3A6906982011
Option 3 - (most reliable but most expensive) - http://www.amazon.com/EVGA-Continuous-Warranty-Supply-100-W1-0430-KR/dp/B00H33SDR4/ref=sr_1_2?s=pc&ie=UTF8&qid=1459090182&sr=1-2&keywords=computer+power+supply&refinements=p_n_feature_keywords_two_browse-bin%3A6906982011
6 pin power supply cable (if you are going to use a computer power supply) - http://www.amazon.com/StarTech-com-8-Inch-Express-Extension-PCIEPOWEXT/dp/B004ZMYBAE?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Heated bed - http://www.amazon.com/SainSmart-printers-HeatBed-Updated-Version/dp/B00EZKEGG0?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Thermistor - http://www.amazon.com/3D-CAM-Thermistors-pre-wired-Insulated/dp/B010MZ8TCS?ie=UTF8&psc=1&redirect=true&ref_=od_aui_detailpages00
Glass sheet or aluminum plate
Just the glass ¬- http://www.amazon.com/Signstek-Printer-Heated-Tempered-Borosilicate/dp/B00QQ5Q3BI/ref=pd_sim_328_1?ie=UTF8&dpID=517oPiurXuL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=11QTYJ782B9G799FY1NQ
Binder clips or high temp silicone
Kapton Tape - http://www.amazon.com/Mil-Kapton-Tape-Polyimide-Yds/dp/B006ZFQNT6/ref=pd_sbs_328_3?ie=UTF8&dpID=51B2bKUSrQL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1JD46P50X1NBJB9XCEXH
5.5mm bullet connector positive inside ALWAYS CHECK POLARITY WITH A MULTIMETER BEFORE USE!!!!
No wires - http://www.hobbyking.com/hobbyking/store/__34756__2_1mm_5_5mm_DC_Plug_Jack_2pc_.html
No wires - http://www.amazon.com/5-5mmx2-1mmx9mm-Solder-Power-Laptop-Adapter/dp/B00O9YWJMA/ref=sr_1_9?s=industrial&ie=UTF8&qid=1459105509&sr=1-9&keywords=5.5mm+x+2.1mm
No wires - http://www.amazon.com/iMBAPrice-iMBA-CCTV-PGTM-10-Security-Camera-Pigtail/dp/B0054D80LE/ref=pd_sim_23_10?ie=UTF8&dpID=41xucPsa3RL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0E6TYA4R2FNBBJ9ASE0M
Pre-wire (could use something like this, but it is not recommended because the gauge of the wire isn’t well suited for higher amp draws. So if you can find something better then you can use that.) - http://www.amazon.com/AFUNTA-10pack-5-5mm-Pigtail-Female/dp/B00PZVDPTM/ref=pd_sim_421_5?ie=UTF8&dpID=41W-bk0vG6L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1D3GQ87BBA7Y0P7GS2VD

JST connector - (will be slightly modified to be made slightly smaller) or similar size plug - http://www.amazon.com/uxcell-Pairs-Female-Connector-Battery/dp/B00EZH8P9W/ref=pd_sim_23_12?ie=UTF8&dpID=412TTkahVIL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1K273RK153ZAJ1DNYM9X
Tab connector
Option 1 - (something like this but you are going to want to look around for size which is around ¼ in to fit 5mm tab on printer and quantity unless you want 100 of them) - http://www.amazon.com/Insulated-Connector-Electrical-Terminal-14-16AWG/dp/B00FZK947A/ref=pd_sim_60_10?ie=UTF8&dpID=41BkXqBsNFL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0R06C6ANSCHNVJFCM0QR
3d printed mounting hardware (thanks to brkdwn on thingiverse) - http://www.thingiverse.com/thing:1158614
Spacer for z axis limit switch
Heat shrink or electrical tape
If you have any questions or video ideas please please comment down below.
Please like, subscribe, and share.

Видео Hobby King DIY Print-rite 3D heated bed install part 1/3 канала Channel Everything