Why this WON'T go past 50,000+ RPM | 3D Printed Gear Box
In this video I designed and built a 3D printed gearbox. This gearbox can take a low RPM and convert it to a higher RPM but with a catch... there is also an increase in the amount of force needed to turn the input. As more gears are added to the system the torque also is multiplied significantly. This is the one trade off with gears RPM vs Torque. For this reason this gear ratio wont go past 50,000 RPM. This project will also lay the groundwork for future projects so please subscribe so you won't miss out!
Видео Why this WON'T go past 50,000+ RPM | 3D Printed Gear Box канала Channel Everything
Видео Why this WON'T go past 50,000+ RPM | 3D Printed Gear Box канала Channel Everything
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Virginia Tech Drone Racing Team 2020 Promo](https://i.ytimg.com/vi/LColNU3jXNw/default.jpg)
![Hobbyking DIY Print Rite 3D Printer Unboxing](https://i.ytimg.com/vi/Mdwx6CWfu88/default.jpg)
![Upload a .STL from inventor for 3D printing](https://i.ytimg.com/vi/UrggMrdTJOg/default.jpg)
![Hobby King DIY Print-rite 3D heated bed install part 2/3 (power supply) any 3D printer](https://i.ytimg.com/vi/PabCbcrXzl4/default.jpg)
![Two ultrasonic sensors on a servo for angle and distance data](https://i.ytimg.com/vi/dHZB0WhLl8g/default.jpg)
![downloading and installing unbuntu 15.04 to odroid xu4 and other versions or similar boards](https://i.ytimg.com/vi/VEIS1bzxN2E/default.jpg)
![Believer - Imagine Dragons | Lyric Video](https://i.ytimg.com/vi/EnbPPCqFTXc/default.jpg)
![Fixing a Fried Turnigy 9x | New board install](https://i.ytimg.com/vi/7yLVqsS9YtA/default.jpg)
![Hobby King DIY Print-rite 3D heated bed install part 1/3](https://i.ytimg.com/vi/vQEJjmUvozM/default.jpg)
![Hobby King DIY Print-rite 3D heated bed install part 3/3 (final connections)](https://i.ytimg.com/vi/Z6uGIN4NbYo/default.jpg)
![3D Printing Tips and Tricks for Better Quality](https://i.ytimg.com/vi/Gt_Vr-Ht_3Q/default.jpg)
![Mavic Pro 4K Footage](https://i.ytimg.com/vi/CxOtSyxw8yo/default.jpg)
![How To Use Repetier Host | 3D Printing](https://i.ytimg.com/vi/ZFh70WeDJwI/default.jpg)
![Applying Painters Tape to The Print Rite 3D](https://i.ytimg.com/vi/AXlPP2gMRSA/default.jpg)
![How to unload and load filament on the Print Rite 3D](https://i.ytimg.com/vi/RBV2JDJVnas/default.jpg)
![The Parking Drone](https://i.ytimg.com/vi/GNEA6GQX2S0/default.jpg)