Fixing a Fried Turnigy 9x | New board install
I was finally able to fix the turnigy 9x radio that i fried a year ago. I just replaced the main board which I found on banggood. The one sold by hobby king is the same thing but it is never in stock. It didn't work the first time because because one of the traces had actually burned up so I just had to reconnect it.
This is the replacement board - http://goo.gl/YKl7kT
If you have any questions or video ideas please please comment down below.
Please like, subscribe, and share.
Видео Fixing a Fried Turnigy 9x | New board install канала Channel Everything
This is the replacement board - http://goo.gl/YKl7kT
If you have any questions or video ideas please please comment down below.
Please like, subscribe, and share.
Видео Fixing a Fried Turnigy 9x | New board install канала Channel Everything
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Virginia Tech Drone Racing Team 2020 PromoHobbyking DIY Print Rite 3D Printer UnboxingUpload a .STL from inventor for 3D printingHobby King DIY Print-rite 3D heated bed install part 2/3 (power supply) any 3D printerTwo ultrasonic sensors on a servo for angle and distance dataWhy this WON'T go past 50,000+ RPM | 3D Printed Gear Boxdownloading and installing unbuntu 15.04 to odroid xu4 and other versions or similar boardsBeliever - Imagine Dragons | Lyric VideoHobby King DIY Print-rite 3D heated bed install part 1/3Hobby King DIY Print-rite 3D heated bed install part 3/3 (final connections)3D Printing Tips and Tricks for Better QualityMavic Pro 4K FootageHow To Use Repetier Host | 3D PrintingApplying Painters Tape to The Print Rite 3DHow to unload and load filament on the Print Rite 3DThe Parking Drone