How To Avoid Digging Trash & Iron With The XP Deus 2!

In this video I use the XP Deus 2 to show how you can avoid digging bottle caps, some aluminum, and iron.
I make some comparisons between the Equinox 800 vs the XP Deus and how the discrimination is set up.
The discrimination is VERY confusing on the Deus 2 because iron tones bleed into the conductive target ID (TID) scale!
In this video you will join me on my own discovery process.
When I say “discriminate out”, that can mean two things with the Deus 2:
1) You could simply notch out TID numbers, in which case you won’t hear any sound at all when those numbers come up. This is NOT something you ever want to do.
2) The Deus 2 reports a non-ferrous PITCH frequency for the first tone segment.
This segment usually begins with a TID range of 1-7. However, we soon discover that we need to bump this number up to 1-10 (or higher!) to catch the RANGE of the iron.
Then, and this is extremely important, you need to go into:
TONES—EXPERT, and change the frequency of the first tone segment (1-10) to 100HZ! Then, and only then, will you hear the 1-10 TID range REPORT AS IRON TONES.
Then you will be able to hear those iron tones interrupting any high-tone false signals given off by iron halos!
You will no longer hear a consistent false tone when you’re on top of a nail. The good-false tones will be interrupted by low iron tones and reveal the true nature of what’s under your coil!
I call this “signal decay”: When a seemingly good consistent high tone is infuriated by iron tones the more you sweep over it. A clear sign the target is a nail (or any other iron).

In the video you will see me toggle between MULTI-FREQUENCY and SINGLE FREQUENCY. I do this easily with the click of my thumb because I saved two custom programs back to back, the details of those are as follows:

SETTINGS VIDEO: https://youtu.be/Fs5jx5E8-Y0

My Settings:
I have two custom modes I alternate between:
1) High Conductor program (customized).
~Reactivity 1.5 or 2 at the highest.
~Silencer 0.
~Bottle Cap Reject 0.
~3 Tones.
~Tone Pitch, I bump up my 3rd tone segment pitch higher so I can hear higher conductors more easily.
The first tone segment I adjust to represent TID 1-10, and I take the frequency down to 100hz (watch the video).
~Audio type- square tones.

2) Deus Mono program (customized) Single frequency of 7.5kHz.
~Reactivity 1.5 or 2 at the highest.
~Silencer 0.
~Bottle Cap Reject 0.
~3 Tones.
~Tone Pitch, I bump up my 3rd tone segment pitch higher so I can hear higher conductors more easily.
The first tone segment I adjust to represent TID 1-10, and I take the frequency down to 100hz (watch the video).
~Audio type- square tones.

Видео How To Avoid Digging Trash & Iron With The XP Deus 2! канала Nwdetectors