Fitting Radiomaster AG01 Gimbals / Calibrating gimbals and drift testing / LED Gimbal backlights

Radiomaster have just released these new V3 AG01 full CNC Hall Sensor Gimbal for their TX16s radios. In this video I'll show you how I fitted them along with the Radiomaster Gimbal LEDS. I also cover how to calibrate them and test if they hall sensors have any drift with temperature.

► Radiomaster AG01 Gimbals: https://bit.ly/3jiEFBz
► Radiomaster Gimbal LED Backlights: https://bit.ly/2ZhfSX4
► Radiomaster: https://radiomasterrc.com

🔔 Subscribe for more: https://bit.ly/3eaCoDk
☕ Buy me a coffee - https://www.buymeacoffee.com/whirlybloke

╔════╡Music and Sound Effects╞════════════════╡
║► Soundstripe - https://bit.ly/3nwZH2j
║► Get 15% off using my discount code - WHIRLY15
╚═════════════════════════════════╡

╔════╡My Gear╞════════════════════════╡
║ ► HD Goggles - SKY03O Oled: http://bit.ly/2WPkBu8
║ ► VRX Module - OwlRX: http://bit.ly/2wjIehD
║ ► Radio - Taranis X9D: http://bit.ly/2WZPzyC
║ ► Portable Battery Charger - ToolKitRC M6D: https://bit.ly/3hGzNDL
║ ► Workshop Battery Charger - iCharger 406 Duo: http://bit.ly/2VDMG5m
║ ► Soldering Workstation - Saike-909: http://bit.ly/2JAr9Jc
╚══════════════════════════════════╡

► Facebook - https://www.facebook.com/whirlybloke/
► Twitter - https://www.twitter.com/whirlybloke/
► Instagram - https://www.instagram.com/whirlybloke/
► Patreon - https://www.patreon.com/whirlybloke/

#whirlybloke

00:00 Welcome to the Whirlybloke channel
00:30 Taking the case apart
02:24 Disconnect the gimbal wires
02:48 Unscrew and remove the gimbals
03:21 Apply gimbal damping oil grease
04:25 Fit gimbal LED backlights
05:56 Fit the AG01 gimbals
08:04 Check gimbal tension and ratchet
09:00 Check the wiring and connectors
09:10 Calibrate the gimbals
10:55 Hall effect gimbals drift
12:40 Testing hall sensor drift
13:45 Thanks for watching

Видео Fitting Radiomaster AG01 Gimbals / Calibrating gimbals and drift testing / LED Gimbal backlights канала Whirly Bloke