Have I finally found the CGC tile burn solution?
I have been having issue after issue using the cold galvanizing compound on a white tile to burn a permanent image. Sometimes it work, sometimes it just washes off in the cleaning process.
I have tried refocusing, different speeds and power settings. Played with the line interval. Cleaning the lens. I tried more CGC coating. Nothing seemed to be working.
The end result, time time, we putting less CGC on the tile. Then the burn turned out great! Is that the solution? Was that the problem? There seem to be so many variables using this process. So it is worth all of this effort?
That is up to you. When this process works, the results are great! When it doesn't work, it is just frustrating.
Видео Have I finally found the CGC tile burn solution? канала CNC AT Home
I have tried refocusing, different speeds and power settings. Played with the line interval. Cleaning the lens. I tried more CGC coating. Nothing seemed to be working.
The end result, time time, we putting less CGC on the tile. Then the burn turned out great! Is that the solution? Was that the problem? There seem to be so many variables using this process. So it is worth all of this effort?
That is up to you. When this process works, the results are great! When it doesn't work, it is just frustrating.
Видео Have I finally found the CGC tile burn solution? канала CNC AT Home
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Bird house assembly - "They" called it a 3D puzzle.](https://i.ytimg.com/vi/9iQCGnLnBAs/default.jpg)
![Testing the LC-50 Plus on card stock](https://i.ytimg.com/vi/j3Lm1p0WopU/default.jpg)
![Easy zero/zero fixture for Atomstack P7](https://i.ytimg.com/vi/ii4BmlN5WGE/default.jpg)
![You won't believe the detail in this coaster - #PowerToTheMakers](https://i.ytimg.com/vi/8EWolLH5OJs/default.jpg)
![Making It Happen YouTube channel - Part 2 - Tissue box burn](https://i.ytimg.com/vi/Mf7oHQEA2kA/default.jpg)
![Does burning with air assist help at all?](https://i.ytimg.com/vi/86S7SPJUaTA/default.jpg)
![Customizing a wooden box for a birthday present](https://i.ytimg.com/vi/46iYlq6v7rQ/default.jpg)
![What to do with the back of a small note pad](https://i.ytimg.com/vi/dHeiFIkAEf0/default.jpg)
![How to make good templates in LightBurn](https://i.ytimg.com/vi/ECpNDn6YVkw/default.jpg)
![Cribbage Board Burn](https://i.ytimg.com/vi/tKBtVUtNVE8/default.jpg)
![Puzzle V2 - Can I make my air plane puzzle project work this time?](https://i.ytimg.com/vi/30vP5gD9K_M/default.jpg)
![Issues with painted tile etching! Part 2](https://i.ytimg.com/vi/3NZe1tIWBE8/default.jpg)
![Cribbage Board Card Pocket](https://i.ytimg.com/vi/nZ0JcYXa8UA/default.jpg)
![Let's visit Paramount Granite](https://i.ytimg.com/vi/wtdpLxH3Gm8/default.jpg)
![How does the fixed focus laser work cutting paper?](https://i.ytimg.com/vi/kBJ1sJZrpoY/default.jpg)
![The Bride and Groom on etched glass](https://i.ytimg.com/vi/Z_v7YT8jjpI/default.jpg)
![Shop Safety](https://i.ytimg.com/vi/0s5y4vQIWYc/default.jpg)
![Can I stop in the middle of a burn and start there later?](https://i.ytimg.com/vi/iziKBTJbGU4/default.jpg)
![Two Cats, a laser, and a camera. Part II](https://i.ytimg.com/vi/v9m86yle-sI/default.jpg)
![2021 The Year In Review at CNC @ Home](https://i.ytimg.com/vi/JFEgyo35eAQ/default.jpg)
![Cold Snack coaster for Vice Grip Garage using LightButn](https://i.ytimg.com/vi/fWx0nbYY5tc/default.jpg)