How To Source 4-20 Milliamps Using The Fluke 789 ProcessMeter

http://bit.ly/2LmcQs9

In this video, you will learn how to source 4-20ma DC current using the Fluke 789 ProcessMeter™ with 250 Ohm HART resistor.

Simply rotate the Fluke 789 ProcessMeter™ rotary knob to the DC milliamp function. Once the knob has been rotated, you have the flexibility in performing span checks at 100% milliamps (20 mA) or 0% milliamps (4 mA). The Fluke 789 also offers manual step (100%, 25%, Course and Fine) adjustments to fit your needs.

If you need to use automatic ramping or step functions, simply rotate the Fluke 789 rotary knob to the mA sourcing function. Once selected, press the blue button on your Fluke 789 to the desired function.

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a loop calibrator with the power of a digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a display that's not only twice as large as the Fluke 787, but also twice as bright with two levels of backlighting. And its built-in, selectable 250 ohm HART® resistor eliminates the need to carry a separate resistor.

For more information about the Fluke 789 ProcessMeter™, visit the Fluke website: http://bit.ly/2LmcQs9

#Fluke789 #4-20mA #processmeter

Видео How To Source 4-20 Milliamps Using The Fluke 789 ProcessMeter канала Fluke Corporation