PLC Analog Inputs and Signals
✅ C'mon over to https://realpars.com where you can learn PLC programming faster and easier than you ever thought possible!
==========================
✅ Check out the full blog post over at
https://realpars.com/plc-analog-inputs/
==========================
In this video, we are going to be talking about analog inputs to the PLC.
What do we mean by analog input? Analog values are continuous values, such as temperatures and pressures.
While we tend to think of them in digital terms, at some point we have to convert them from the continuous world into our digital world, and this is where analog inputs come in.
Voltage signals in the range of plus or minus 20 volts or so and current signals in milliamps are commonly used as both analog inputs to PLCs.
Every PLC manufacturer has I/O modules to deal with these kinds of signals, along with other, more specialized modules.
==========================
Missed our most recent videos? Watch them here:
https://realpars.com/servo-motors-advantages/
https://realpars.com/motion-control/
https://realpars.com/rs232/
=============================
To stay up to date with our last videos and more lessons, make sure to subscribe to this YouTube channel:
http://goo.gl/Y6DRiN
=============================
TWEET THIS VIDEO https://ctt.ac/T2_b0
=============================
Like us on Facebook: https://www.facebook.com/therealpars/
Follow us on Twitter: https://twitter.com/realpars
Follow us on LinkedIn https://www.linkedin.com/company/realpars
=============================
A special thanks to Frederico Duarte Fagundes for translating this video.
#RealPars #PLC #PLCanaloginput
Видео PLC Analog Inputs and Signals канала RealPars
==========================
✅ Check out the full blog post over at
https://realpars.com/plc-analog-inputs/
==========================
In this video, we are going to be talking about analog inputs to the PLC.
What do we mean by analog input? Analog values are continuous values, such as temperatures and pressures.
While we tend to think of them in digital terms, at some point we have to convert them from the continuous world into our digital world, and this is where analog inputs come in.
Voltage signals in the range of plus or minus 20 volts or so and current signals in milliamps are commonly used as both analog inputs to PLCs.
Every PLC manufacturer has I/O modules to deal with these kinds of signals, along with other, more specialized modules.
==========================
Missed our most recent videos? Watch them here:
https://realpars.com/servo-motors-advantages/
https://realpars.com/motion-control/
https://realpars.com/rs232/
=============================
To stay up to date with our last videos and more lessons, make sure to subscribe to this YouTube channel:
http://goo.gl/Y6DRiN
=============================
TWEET THIS VIDEO https://ctt.ac/T2_b0
=============================
Like us on Facebook: https://www.facebook.com/therealpars/
Follow us on Twitter: https://twitter.com/realpars
Follow us on LinkedIn https://www.linkedin.com/company/realpars
=============================
A special thanks to Frederico Duarte Fagundes for translating this video.
#RealPars #PLC #PLCanaloginput
Видео PLC Analog Inputs and Signals канала RealPars
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Wire Discrete DC Sensors to PLC - Part 1What is Ethernet/IP?What is a Level Sensor?Siemens TIA portal: how to use Analog input/output signals modules?Programable Logic Controller Basics Explained - automation engineeringStar Delta Starter Explained - Working PrincipleWhat is a Servo Motor and How it Works?Lesson 1- Understanding Analog inputs in PLC (Hindi & English)What is the Difference Between PLC and DCS?Variable Frequency Drives Explained - VFD Basics IGBT inverterWhat is Sensor Calibration and Why is it Important?Sinking/Source PLC Inputs with PNP/NPN Sensors, the Source of Confusion in Industrial AutomationWhat is Ethernet?How to Follow an Electrical Panel Wiring DiagramWhat are the Most Popular PLC Programming Languages?What are the Differences between DCS and SCADA?How to Program Analog inputs 4 to 20mA with TIA portal S7-1200 PLC || Lesson# 10What is a PLC? PLC Basics Pt1What is the Difference between VFD and Soft Starter?