Loop troubleshooting effort -- success!
Each student, in nearly every lab activity, must troubleshoot a fault the instructor places into a measurement or control loop. They are given 5 minutes to isolate the type and general location of the fault, and more time (if necessary) to precisely identify and rectify it. The instructor begins by playing the part of a bewildered operator, telling the student (the technician) what the system isn't doing right. Throughout the exercise, the instructor asks the student to explains their reasoning and their diagnostic method to ensure they aren't just guessing theuir way through.
In this activity, the student's troubleshooting procedure was good, and he was able to identify both the nature and location of the problem within 5 minutes using simple test equipment (a multimeter and a wire jumper).
Видео Loop troubleshooting effort -- success! канала BTCInstrumentation
In this activity, the student's troubleshooting procedure was good, and he was able to identify both the nature and location of the problem within 5 minutes using simple test equipment (a multimeter and a wire jumper).
Видео Loop troubleshooting effort -- success! канала BTCInstrumentation
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Loop troubleshooting effort -- fail](https://i.ytimg.com/vi/CTrpTHHblfA/default.jpg)
![How to Set Up a Single Sensor for the Rosemount 3144P Temperature Transmitter](https://i.ytimg.com/vi/xUbyS9Hj3l8/default.jpg)
![Testing and Troubleshooting 4-20 mA Control Loops Presented by Fluke and Transcat](https://i.ytimg.com/vi/UYSrKKegQbc/default.jpg)
![HART communication loop resistance](https://i.ytimg.com/vi/XJ4A-0kGGkI/default.jpg)
![Why Neutrals and Grounds are Separated in a Sub Panel](https://i.ytimg.com/vi/5iEuaAYs5x4/default.jpg)
![Episode 101 Fluke 789 Process Meter Mini Review](https://i.ytimg.com/vi/3kHbt7hOFyc/default.jpg)
![The Fundamentals of 4-20 mA Current Loops](https://i.ytimg.com/vi/0v9ZCD3oL1M/default.jpg)
![How to Calibrate the Rosemount™ 3051SMV Pressure Transmitter Using the AMS Trex Device Communicator](https://i.ytimg.com/vi/uyvqgF9tpCA/default.jpg)
![What is a Transmitter -Instrumentation Technician Course - Lesson 2](https://i.ytimg.com/vi/H9GxcaWnWtI/default.jpg)
![Types of Pressure transmitter | DPT vs PT | Working of Pressure transmitter-EERameshkumar](https://i.ytimg.com/vi/npUWwuST8Pg/default.jpg)
![Flow transmitter troubleshooting|| Flow transmitter field check](https://i.ytimg.com/vi/rxKKfrzZfSQ/default.jpg)
![Control Panel Testing - Tips and Tricks](https://i.ytimg.com/vi/cxWsGwq9X1w/default.jpg)
![Process control loop Basics - Instrumentation technician Course - Lesson 1](https://i.ytimg.com/vi/2EpFIhUHm28/default.jpg)
![How To Use a Process Meter - (5 Step Guide to Source / Simulate 4-20mA)](https://i.ytimg.com/vi/iFxSLNeA42M/default.jpg)
![ABB 266 Pressure Transmitter - Commissioning & Troubleshooting](https://i.ytimg.com/vi/4djn_CsRyhM/default.jpg)
![Temperature Sensors Explained](https://i.ytimg.com/vi/w3Hfj2kMrGo/default.jpg)
![What is a Safety Instrumented System?](https://i.ytimg.com/vi/W2YUNnfATBY/default.jpg)
![Thinking about becoming an Instrumentation Technician?? Watch this](https://i.ytimg.com/vi/npwlaGW8g0M/default.jpg)
![Instrument technician interview | Most asked questions in instrument technician interview](https://i.ytimg.com/vi/25y1lVhDpDQ/default.jpg)
![Calibration of rosemount 3144p pt1 thermocouple](https://i.ytimg.com/vi/jHmwIAdYRGA/default.jpg)