How to Bend Steel Conduit to the Correct Measurement from the End of the Conduit to Back of the Bend

Step by step guide on how to bend steel (metal) conduit to 90 degrees full demonstration.

Students training aid for bending 20 mm Steel (metal) Conduit to produce a 90 degree bend to the correct measurement. Includes a full demonstration on how to produce a bend using set square and a conduit bending machine so the end of the conduit to the back of the bend is at the correct measurement.

How to bend metal conduit to the correct length and to 90 degrees and how to check your bend it at 90 degrees.

RMT Rigid metal conduit.

== 🕐 Time Stamps - Cut to the action 🕕 ==

00:00 - How to bend metal conduit
00:42 - Conduit bending machine
02:18 - Using a scrap piece of conduit
03:05 - 2 pieces of conduit at right angles
03:23 - Confirm your positions
03:36 - Positioning set square, conduit and mark before bending
04:14 - Bending the steel conduit to 90 degrees
04:39 - Checking you conduit is bent to 90 degrees
05:09 - Bend isn't 90 degrees
05:42 - Adding more bend to the conduit
06:45 - Bent to 90 degrees

🔵 Steel Conduit Life Hack How to Make Threading & Bending of Steel (metal) Conduit Loads Easier (EMT) https://youtu.be/vW4lq5OWT-E

Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.

You can follow me day by day on Facebook, Instagram and Twitter lookout for "GSH Electrical.

▶️ FACEBOOK https://www.facebook.com/gshelectrical/

▶️ INSTAGRAM https://instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0/

▶️ TWITTER https://mobile.twitter.com/gsh_electrical

#GSHElectrical #Electricaltrainingvideos

Видео How to Bend Steel Conduit to the Correct Measurement from the End of the Conduit to Back of the Bend канала GSH Electrical