Install 50 Amp welder outlet circuit in workshop for 220/240 VAC MIG welder

Install 50 Amp welder outlet circuit in workshop for 220/240 VAC MIG welder -
In this video, I show the installation of a 50 amp 220/240 volt single-phase welder outlet circuit in my workshop subpanel, with a 3-prong nema 6-50r outlet for my new Chicago Electric MiG170 wire/MIG welder I bought as an open-box deal at Harbor Freight. I used 6/2 cable with 2 (black/white) 6 gauge wires and a ground wire. I show how I ran the wire from the panel to the outlet box and what connections I made.

--Affiliate links to parts/tools shown in this video--

Chicago Electric MIG 170 Welder - https://amzn.to/2wECORs
25 foot extension cord - https://amzn.to/2KvF6Va
Nema 6-50r Receptacle - https://amzn.to/2Itz1YC
SquareD 2-pole 50A breaker - https://amzn.to/2Gm9uil
---

---

Thanks for watching my videos! If you want to support the channel, you can do so in the following ways:

Patreon: https://www.patreon.com/BKHobby

---

Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/designs) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance!

Banggood: https://goo.gl/uXGg84
AliExpress: https://goo.gl/KRNurW
Amazon: https://goo.gl/nWhmjJ

Видео Install 50 Amp welder outlet circuit in workshop for 220/240 VAC MIG welder канала BK Hobby