NodeMCU Kube Multisensor | Part III | openHAB configuration & calibration
NodeMCU Kube multisensor for openHAB 2 - Part 3 - openHAB configuration and sensor calibration. In this part of the NodeMCU Kube multi sensor series, we'll focus on ensuring our sensor is correctly outputting its data over Wifi/MQTT, add the proper MQTT topics to the openHAB items and sitemap files, add charting for the temperature and humidity data the sensor provides to openHAB, and calibrate the sensor by letting it run alongside the main temperature sensor in the house (HVAC thermostat) and finding the correct calibration offset. This completes the initial NodeMCU Kube multisensor build series, but I have future ideas for the sensor, including adding a fully enclosed PIR motion sensor, adding pressure, sound, etc sensors, and adding servos to actually control the HVAC registers and house temperature.
openHAB community forum post with write-up: https://community.openhab.org/t/nodemcu-based-mqtt-multi-sensor-with-oled-display/34509
Note: You will need a persistence service installed if you want to use charts. The simplest one to install is rrd4j, but check out this blog post for a really great write-up on persistence: https://www.smarthomeblog.net/openhab-persistence-tutorial/
Subscribe to my channel for future projects related to the sensor and home automation!
Music by Scott Buckley ("A New Year"): https://www.youtube.com/channel/UCUuUqWLLsUjheuYkP9AWxTA
---
JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions!
---
LINKS TO EQUIPMENT/PARTS USED (AFFILIATE):
-Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN
-32GB Sandisk microSD card - https://amzn.to/2NORDFv
-32GB Sandisk USB Drive - https://amzn.to/2LgvSg8
-USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2
---
LINKS TO INFORMATION/SITES:
-openHAB documentation (https://www.openhab.org/docs/)
-Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd)
-openhabianPI Project/Image - https://github.com/openhab/openhabian
---
Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways:
-Patreon: https://www.patreon.com/BKHobby
-Affiliate links in this description (doesn't cost you anything! :)
---
LINKS TO YOUTUBE GEAR:
-Canon T3i camera - https://amzn.to/2LZGjbJ
-Manfrotto Tripod - https://amzn.to/2AC5pZF
-Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM
-Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz
---
Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance!
Banggood: https://goo.gl/uXGg84
AliExpress: https://goo.gl/KRNurW
Amazon: https://goo.gl/nWhmjJ
Видео NodeMCU Kube Multisensor | Part III | openHAB configuration & calibration канала BK Hobby
openHAB community forum post with write-up: https://community.openhab.org/t/nodemcu-based-mqtt-multi-sensor-with-oled-display/34509
Note: You will need a persistence service installed if you want to use charts. The simplest one to install is rrd4j, but check out this blog post for a really great write-up on persistence: https://www.smarthomeblog.net/openhab-persistence-tutorial/
Subscribe to my channel for future projects related to the sensor and home automation!
Music by Scott Buckley ("A New Year"): https://www.youtube.com/channel/UCUuUqWLLsUjheuYkP9AWxTA
---
JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions!
---
LINKS TO EQUIPMENT/PARTS USED (AFFILIATE):
-Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN
-32GB Sandisk microSD card - https://amzn.to/2NORDFv
-32GB Sandisk USB Drive - https://amzn.to/2LgvSg8
-USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2
---
LINKS TO INFORMATION/SITES:
-openHAB documentation (https://www.openhab.org/docs/)
-Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd)
-openhabianPI Project/Image - https://github.com/openhab/openhabian
---
Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways:
-Patreon: https://www.patreon.com/BKHobby
-Affiliate links in this description (doesn't cost you anything! :)
---
LINKS TO YOUTUBE GEAR:
-Canon T3i camera - https://amzn.to/2LZGjbJ
-Manfrotto Tripod - https://amzn.to/2AC5pZF
-Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM
-Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz
---
Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance!
Banggood: https://goo.gl/uXGg84
AliExpress: https://goo.gl/KRNurW
Amazon: https://goo.gl/nWhmjJ
Видео NodeMCU Kube Multisensor | Part III | openHAB configuration & calibration канала BK Hobby
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Local park FPV (Martian III)BK Hobby Live Stream #5 - Kube v2 Prototype tests & tinkering[Channel stuff] - PCBWay PCB Contest Award - 1 year anniversary announcement!BK Hobby Live Stream #3 - Building a new Workshop/Streaming PC LiveBK Hobby Live Stream #1 - NodeMCU Breakout board v1.2 tinkering - Part 3 (Fix for board issue)BK Hobby Live Stream #7 - Tinkering with my Prusa i3 clone (part 2)BK Hobby Live Stream #2 - Building a Kube multisensor Live + ESP Easy IntroductionBK Hobby Live Stream #6 - Tinkering with my Prusa i3 cloneBK Hobby Live Stream #1 - NodeMCU Breakout board v1.2 tinkeringNodeMCU Kube LED Strip Controller Part II (Arduino Software)BK Hobby Hangout #9 - Kube v2 Prototype 3d enclosure modelingopenHAB 2 Basics - PersistenceopenHAB 2 Basics - Rules DSL IntroductionopenHAB 2 Basics - Sitemaps and User InterfacesNodeMCU Kube home automation multisensor Build - Part I (Hardware)openHAB 2 Basics - Upgrade procedure | Common issues solutions and tips!openHAB Projects | Installing Panel Power Meter | Aeon DSB09 Zwave Home Energy MeteropenHAB 2 Basics - Items & Links | Creation and ConfigurationopenHAB 2 Basics - Editing Configuration Files | Installing Visual Studio CodeNodeMCU ESP8266 Kube Multi Sensor for openHab home automation: Demo & Overview