NodeMCU Kube home automation multisensor Build - Part I (Hardware)

NodeMCU Kube Multisensor Build - Part I - focusing on the hardware build of the NodeMCU home automation Multi sensor for openhab, including soldering the PCB, OLED screen, and DHT 22 temperature/humidity sensor. We'll put the completed home automation sensor into the 3d printed enclosure, ready for the next step (programming).

I use the sensors in my openHAB home automation setup, for reporting temperature, humidity, motion, etc..These openhab sensors are very cheap, easy to make and look professional, the openhab sensor OLED screen also allows easy local monitoring as well as remote temperature sensor reporting, and the external sensor connector allows adding other types of sensors to this DIY home automation sensor.

---
Parts List/BOM:

Enclosure - https://www.thingiverse.com/thing:2539897
OLED screen (http://amzn.to/2xR4iQP)
NodeMCU breakout board (https://goo.gl/U2fY7y)
NodeMCU ESP8266 v0.9 ($6 & Prime from Amazon: http://amzn.to/2hd6RJk, $3 from AliExpress: https://goo.gl/fQGwBN) or 1.0 (http://amzn.to/2ymAkak).
DHT-22 sensor (http://amzn.to/2ymmODK)
headers (http://amzn.to/2fNe81C)
solid hook-up wire, 22awg (http://amzn.to/2xbTaAW)

---

Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/designs)! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance!
Amazon: https://goo.gl/nWhmjJ
Banggood: https://goo.gl/uXGg84
AliExpress: https://goo.gl/KRNurW

Видео NodeMCU Kube home automation multisensor Build - Part I (Hardware) канала BK Hobby