DOUBLE ah capacity of Tool BATTERY PACKS 18v 20v Milwaukee Dewalt Makita Bosch Ridgid M12 Ryobi MAH

MORE POWER and LONGER RUN TIMES. Increase the mah capacity of almost any battery pack.

Shoe Goo "Duct Tape of Glues": https://amzn.to/30XXzET

LONG security Torx bits: https://amzn.to/2NHQXqz
Nickle tabs to make your own packs: https://amzn.to/2CsBnJx

Dewalt Gyroscopic Screwdriver: https://amzn.to/2XXKxW7
Milwaukee M12 Cut off tool 2552-20 : https://amzn.to/31XPuiI
Milwaukee M12 3/8 Impact 2554-20 : https://amzn.to/31RUDZL

18650/21700 battery cells. You will find the cheapest way to get new HIGH DRAIN cells is to buy them in a battery pack already. You would think finding them separate would be a good deal but NO. Now if you need a bunch you can by Kobalt, Ryobi etc battery packs with lower cost cells for your projects. You will have to do more soldering in some cases and I suggest Nickle solder tabs for the confined space: https://amzn.to/2CsBnJx . Regular 18650 cells you find online for laptops, powerbanks etc can't deliver enough amps to power these tools and will destroy themselves the first time you use them. They have to be HIGH DISCHARGE/DRAIN. To power a basic drill you will need at least 15-20amp. However 30amps plus is ideal so you can get this with two parallel series sets of 15 amps or 4 series sets for 60amps. That being said the more availiable amps the better. It puts far less heat into the tool and battery, increasing the life of both. Higher end packs will come with 20,25 and even 30amp draw cells for ultimate tool performance and combining them will give you a huge boost in perfromance and run time.

SAFETY: Don't touch positive to negative and nothing can go wrong. Take your ring and watch off.
FACTORY WARRANTY: LOL
WIREING: 18v and 20v(5 cells 18650 or 21700) are identical just marketing. 10.8v and 12v(3 cells 18650) are identical just marketing. Each row of cells is connected Positive+(little nipple) to Negative-(flat) to create your overall tool voltage. This is called "series"when they are end to end. A second row can be added, this is called "parallel" because it runs parallel to the other row(s). Each individual cell or parallel cells have wireing/contacts at each end so the charger can charge each parallel set to approx 4volts(balance charging). More questions about this just ask.
www.instagram.com/sixtyfiveford/
LINKS above are affiliate links and all things I have bought with my own money and fully support. I may however make a few cents if you purchase something from Amazon. This in no way influenced my descision to use these particular links.

Видео DOUBLE ah capacity of Tool BATTERY PACKS 18v 20v Milwaukee Dewalt Makita Bosch Ridgid M12 Ryobi MAH канала sixtyfiveford