Use any brand battery in any power tool 18v-20v DEWALT MILWAUKEE MAKITA PORTER CABLE BOSCH adapters

Dewalt battery in a Makita, Makita in a Milwaukee, Milwaukee in a Dewalt, Dewalt in a Ryobi, Porter Cable in a Makita..................... The possibilities are endless with battery adapters.

-Battery adapters shown in the links below-
listed BATTERY you have to the brand of TOOL you want to run.

*Dewalt 20v &
*Milwaukee M18 Batteries
(accepts both brands)
to Makita: https://amzn.to/2YX9G2N (DM18M)
to Ryobi: https://amzn.to/2HsO5qG (DM18RL)
to BOSCH: https://amzn.to/2KcCGwo
to CRAFTSMAN 19.2V: https://amzn.to/2UNMsvx
to 18v Old Dewalt Nicad: https://amzn.to/2YnQBrz

*DeWALT 20v Battery
-M18 Milwaukee: https://amzn.to/2SRK30t
-OLD 18v Dewalt Nicad: https://amzn.to/2TLLiAb
-Hitachi: https://amzn.to/3miV3Rb
-USB charging ports: https://amzn.to/2S4TWr0

*M18 Milwaukee Battery
-20vMaxDewalt: https://amzn.to/2SQDACD or https://amzn.to/2V8CQLb
-old Milwaukee NICAD v18: https://amzn.to/3atw8W5
-RYOBI 18v: https://amzn.to/2HsO5qG
-USB charger and power source: https://amzn.to/2S6a4sa

*20v Porter Cable, Black and Decker, Stanley batteries(18v Bostitch)
-Makita 18v: https://amzn.to/3aoCSqF
-18v OLD DeWalt Nicad: https://amzn.to/38vNMal (BPS18D)
-Nicad 18v Black & Decker: https://amzn.to/38h50dZ
-18v Nicad Porter Cable: https://amzn.to/2RmH3cQ
-Craftsman 19.2v: https://amzn.to/31ZMeDc
-BOSCH 18v: https://amzn.to/2HpH7CM
-RYOBI 18v: https://amzn.to/2UWsNtm

*Makita 18v Battery
to 20vMax Dewalt: https://amzn.to/2wlPxsG
to M18 Milwaukee: https://amzn.to/37rB7nv
to 20vMax PORTER CABLE Black Decker: https://amzn.to/2WpEjx4
to 18v Nicad Makita: https://amzn.to/2UCUlCq
to Bosch 18v: https://amzn.to/35frqdA
to Ryobi 18v : https://amzn.to/3dva9yE
to 18v BOSCH: https://amzn.to/2viqQwJ
to 14.4v Nicad Makita: https://amzn.to/30XSrPi
to 20v WORX : https://amzn.to/34R49yS
to USB charging ports: https://amzn.to/37KzHW8

*WORX 20v
to old 18v WORX tools: https://amzn.to/3oTq1BQ

*BOSCH 18v
to Makita 18v: https://amzn.to/2XbGuo6
to Twin USB charging ports: https://amzn.to/319wvRJ

*Ridgid 18v

you will have to make your own https://youtu.be/2nNDF1qYTEw

to USB power source: https://amzn.to/2RN7Fni

*18v Ryobi to other tools: you will have to make your own https://youtu.be/2nNDF1qYTEw
*HERCULES, BAUER, HART:
to other tools: you will have to make your own https://youtu.be/2nNDF1qYTEw
Some of the links are affiliate links and I may or may not make a few cents off of them. If you can wait a month you can get them for a few dollars less from China.

RYOBI heads up
No one is making Ryobi battery to anything YET. MAKE YOUR OWN BATTERY CONVERTER ADAPTER. I've made adapters from scratch without too much trouble and you could do it in about an hour. You just need an old Ryobi junk tool(old flashlight etc) as the Ryobi battery receptor and then you'll need one of the adapters I have listed that fits the tool you want ie: DeWalt. You'll want this purchased adapter for the computer chip and battery mount. You cut the Ryobi junk tool and wire it to the Dewalt adapter. Epoxy it all together and your done. Here's a video of one I made for a different tool. https://youtu.be/q2eaKCzf04c

One word of cation with Ryobi(and possibly Ridgid): They are the only current made tool with no low battery shutoff built into the tool itself. They control this entirely through the battery as their tools are backwards compatible with their 20+yr old Nicad packs. So you will need to monitor battery voltage and stop when the meter shows or when the tool starts to slow. Continuing to use the tool when it's dying could damage the Dewalt, Makita, etc battery pack.

*Lithium to Nicad tools adapters: https://youtu.be/q2eaKCzf04c
You will need to stop using the tool before you drain the battery too low. Don't continue using the tool to the point that the tool is getting weak(low battery) or worse stops. Stop and Charge the battery. Lithium packs can be charged anytime and have zero memory effect unlike the old Nicad. Continuing to use the tool when it's dying could damage the Dewalt, Makita, Milwaukee, Black Decker etc battery pack.

Metal Cutting Diamond Blade: https://amzn.to/314gpsB
RYOBI Cordless Bandsaw P590 : https://amzn.to/2RakKa8
Makita Cordless Angle Grinder XAG09 : https://amzn.to/2G6i86T
Dewalt Mid Range Impact DCF894 : https://amzn.to/2ueMC40
Milwaukee M12 3/8 stubby impact 2554-20 : https://amzn.to/2R7z1nX
Porter Cable Angle Grinder PCC761: https://amzn.to/2RBoUH9

Will work great with an Impact Wrench, Drill, Hammer Drill, Impact Drill, Rotary Hammer, Band Saw, Circular Saw, Reciprocating Saw, Angle Grinder, Lights, etc.

STAY UP TO DATE BETWEEN PROJECTS
www.instagram.com/sixtyfiveford/
www.facebook.com/sixtyfiveford/

Видео Use any brand battery in any power tool 18v-20v DEWALT MILWAUKEE MAKITA PORTER CABLE BOSCH adapters канала sixtyfiveford