Probably the Easiest Router Sled out there ( Flattening a Live Edge Slab without a Planer)
Making a simple and cheap router sled for flattening boards and slabs. This jig allows you to joint and plane bigger boards that won't fit in your planer or jointer with help of a router. I used some 30mm by 30mm angle iron and some 18mm plywood scraps, a few screws and you are done. you can make this in just a couple of minutes. I used some spacers on my router attached with some hot glue to accommodate for the rounded corners of the angle iron. and took some 5cm by 5cm pine wood to ride the sled on. With the plywood strips, I can easily adjust the height of the sled. I've chosen an 18mm router bit to flatten the beech slab because that was my largest bit. If you have any questions leave them in the comments down below, I do my best to answer all of them! Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Buy Tshirts and mugs here: https://teespring.com/stores/ollaris
Shop Tools/Supplies (affiliate):
Incra T-rule: https://amzn.to/2xglcM5
Glu-Bot Glue Bottle: https://amzn.to/2LAxcej
Belt Sander: http://amzn.to/2GJ1Srn
Spindle Sander: http://amzn.to/2DImDpz
The track saw: http://amzn.to/2EZLL77
Table saw: http://amzn.to/2DvGHdH
Miter saw: http://amzn.to/2DuJi7F
Nail Gun: http://amzn.to/2Ds47kV
Compressor: http://amzn.to/2FYOhMg
Bandsaw: http://amzn.to/2FwECMy
Visit my Website: http://www.ollaris.tv
Subscribe for more videos: https://www.youtube.com/c/Ollaris
Twitter: https://www.twitter.com/Ollari_s
Instagram: https://www.instagram.com/ollari.s
Music by Epidemic Sound (http://www.epidemicsound.com)
Видео Probably the Easiest Router Sled out there ( Flattening a Live Edge Slab without a Planer) канала Ollari's
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Buy Tshirts and mugs here: https://teespring.com/stores/ollaris
Shop Tools/Supplies (affiliate):
Incra T-rule: https://amzn.to/2xglcM5
Glu-Bot Glue Bottle: https://amzn.to/2LAxcej
Belt Sander: http://amzn.to/2GJ1Srn
Spindle Sander: http://amzn.to/2DImDpz
The track saw: http://amzn.to/2EZLL77
Table saw: http://amzn.to/2DvGHdH
Miter saw: http://amzn.to/2DuJi7F
Nail Gun: http://amzn.to/2Ds47kV
Compressor: http://amzn.to/2FYOhMg
Bandsaw: http://amzn.to/2FwECMy
Visit my Website: http://www.ollaris.tv
Subscribe for more videos: https://www.youtube.com/c/Ollaris
Twitter: https://www.twitter.com/Ollari_s
Instagram: https://www.instagram.com/ollari.s
Music by Epidemic Sound (http://www.epidemicsound.com)
Видео Probably the Easiest Router Sled out there ( Flattening a Live Edge Slab without a Planer) канала Ollari's
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making A Router Sled And Flattening Small Slabs For My Next ProjectUse Half the Epoxy In Your Table ProjectDON'T make these Router Sled Mistakes! | WoodworkingEasy and Adjustable DIY Router-Planer | How ToRouter On Rails! // Leveling and Flattening Surfaces so that They're Smooth as a Baby's Bottom! 🍑Upgraded router sled rails and a new flattening bit! / How to flatten a slabHow to make a DIY Router sled / Flattening Jig / Router JigAdjustable Router Sled HomemadeMy Version of a Router Flattening Jigplaning wide boards perfectly with electric hand planer / amazing way of planing [woodworking]Router Sled — Build Under an Hour!5 Ways to Joint a Board Without a JointerSlab Flattening Mill - Woodpeckers$10 DIY ROUTER SLED - SLAB FLATTENING 101Flattening Boards with a Router SledThe Router Bits - How to Build and Use a Router PlanerHow to Flatten a Live Edge Wood SlabA VERY SIMPLE ROUTER SLEDFlattening a Chainsaw Milled Slab | DIY Router SledHow to Flatten a Wood Slab on your Workbench with a Router