How to turn a $30 overdrive pedal into a $180 pedal -- The Boss SD-1 turned into a TS808

Good morning, good afternoon, or good evening, depending on where you are and when you watch this. Today I'd like to show you something a bit more with the honorable Tubescreamer (™) circuit. As most know, the ts808 (™) is a decently expensive pedal (and a great one). While outlining some mods for my new book coming out, this is one of them that will be in the book: Turning the Boss SD-1 Super Overdrive into a Ibanez Tubescreamer TS808 (™) type circuit, with about $5-10 in parts, a soldering iron, some patience, and the will to break the warranty on the Boss pedal.

What's your favorite Boss SD-1 mod?
If you're a DIY'er, where do you like to buy your parts from?
Lastly, do you like these types of videos?

Comment below, make sure you subscribe and click the little "bell" next to subscribe so you get notifications when new videos come out.

To purchase a new Boss sd-1 from Amazon, click here: http://amzn.to/2FkqKoJ

Wampler Shirts/Sweatshirts/other merch available here: https://modyourownpedal.com/collections/wampler-merch

------------------------------------------------------------------------------------------

Addition... here's the parts list:

How to modify a Boss sd-1 into a TS808 Tubescreamer style circuit

R1- 1K
C1 - .022 UF
R2 - 510K
C2 - 1UF
R4 - 10K
R5 - 51K
GAIN POT - CHANGE TO 500K AUDIO TAPER
D6 - JUMPER
D4 - 1S1588, MA150, OR KEEP STOCK
D5 - 1S1588, MA150, OR KEEP STOCK
R7 - 1K
C4 - .22UF
C6 - REMOVE (DON’T JUMPER)
R9 - 1K
C5 - .22UF
R8 - 220 OHM
R10 - 1K
VOLUME POT - CHANGE TO 100K LINEAR TAPER
C8 - .1UF
R16 - 100 OHM
R17 - 10K
Opamp - If you’re SD-1 doesn’t have a 4558 type, change it.

*NOTE: All “C” locations are capacitors. All “R” locations are resistors.
You can find parts at http://www.smallbear-electronics.mybigcommerce.com/ or see comments for other places

Видео How to turn a $30 overdrive pedal into a $180 pedal -- The Boss SD-1 turned into a TS808 канала Wampler Pedals