COLOP e-mark mobile colour inkjet printer: Device Setup

To set up the COLOP e-mark, simply remove the top cover and the battery, open the bottom latch, insert the cartridge and re-assemble the e-mark. Around 5000 imprints can be made with a full ink cartridge, with an imprint size of 14 mm x 100 mm and a coverage of around 15 %.

The e-mark is based on ink-jet technology. You will find a tri-colour ink cartridge inside the e-mark, which was especially developed for the COLOP e-mark. The ink is water-based and any colour combinations are possible with the three inks inside the cartridge.

Note that only original COLOP e-mark cartridges can be used. Other cartridges with the same size will not work.

The e-mark can stamp on any absorbent surfaces, such as paper, books, cardboard, serviettes or wood. Other surfaces such as glass or metal can be stamped, but the ink can be washed away. Use the COLOP label sheets to mark on these surfaces with the e-mark.

For more information on the e-mark, please visit our website:
https://emark.colop.com/
Or contact us:
https://emark.colop.com/contact/

Follow us on Facebook, Instagram and LinkedIn for all the latest e-mark information:
https://www.facebook.com/colopstamps/
https://www.instagram.com/colop_stamps/
https://www.linkedin.com/company/colop/

Видео COLOP e-mark mobile colour inkjet printer: Device Setup канала COLOP Stamps