Live Q&A #250 – Zero Plane and Modeling Plane - Open Q&A
Live Q&A #250 – Zero Plane and Modeling Plane - Open Q&A
More down here ↓↓↓ Click MORE!
In this live stream I’ll be answering your questions about the Zero Plane and the Modeling Plane. As there is some confusion, I’ll be discussing the Zero Plane within the context of importing 3D models, as well as within the design space. There will also be some special surprises along the way to celebrate the 250th Weekly Live Stream. This will be in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions.
Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:
Link to Michael Mezalick’s YouTube channel: https://www.youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: https://www.youtube.com/c/cncnutz
Link to Laney Shaughnessy’s YouTube channel SpindleTV: https://www.youtube.com/@SpindleTV
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Click the JOIN button to get access to perks: https://www.youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: https://www.youtube.com/intl/en_au/join/
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. https://www.youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:
PayPal: https://paypal.me/MarkLindsayCNC
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
___________________________________________________________________________________
For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: https://www.youtube.com/user/Vectric
Interested in hosting your own live streams? Check out StreamYard: https://streamyard.com/pal/5708919750000640
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Check out StreamYard: https://streamyard.com/pal/d/5708919750000640
Видео Live Q&A #250 – Zero Plane and Modeling Plane - Open Q&A канала Mark Lindsay CNC
More down here ↓↓↓ Click MORE!
In this live stream I’ll be answering your questions about the Zero Plane and the Modeling Plane. As there is some confusion, I’ll be discussing the Zero Plane within the context of importing 3D models, as well as within the design space. There will also be some special surprises along the way to celebrate the 250th Weekly Live Stream. This will be in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions.
Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:
Link to Michael Mezalick’s YouTube channel: https://www.youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: https://www.youtube.com/c/cncnutz
Link to Laney Shaughnessy’s YouTube channel SpindleTV: https://www.youtube.com/@SpindleTV
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Click the JOIN button to get access to perks: https://www.youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: https://www.youtube.com/intl/en_au/join/
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. https://www.youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:
PayPal: https://paypal.me/MarkLindsayCNC
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
___________________________________________________________________________________
For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: https://www.youtube.com/user/Vectric
Interested in hosting your own live streams? Check out StreamYard: https://streamyard.com/pal/5708919750000640
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Check out StreamYard: https://streamyard.com/pal/d/5708919750000640
Видео Live Q&A #250 – Zero Plane and Modeling Plane - Open Q&A канала Mark Lindsay CNC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Live Q&A #257 – Vectric V12+ for the Absolute Beginner – Part 5LIVE Q&A #60 - Using 3D Tabs in VCarve and AspireLive Q&A #56 - Open Q&AMake A Hardware Organizer From ScrapLive Q&A #181 – Repairing the Spoilboard on my Avid 4848 Pro CNC RouterLIVE Q&A #89 - Importing DXF FilesLive Q&A #226 – Alignment Tools – Open Q&ALive Q&A #156 – Leveling, Squaring, and Tramming My @AvidCNC 4848 Pro CNCLIVE Q&A #48 - Grouping Toolpaths and Saving G-CodeLIVE Q&A #73 - 50 Star Union for a US FlagHow I Clamp a Scarf JointTiling Toolpaths Part 2 – Mounting and Cutting the ProjectThe Vectric Tool Database – Tool Naming ConventionsAdding a T-Track Spoilboard to My Avid 4848 Pro CNCLive Q&A #100 – Open Q&ALive Q&A #132 – Open Q&ALive Q&A #204 – Open Q&ALive Q&A #231 – Basic Node Editing – Open Q&ALIVE Q&A #42 - Creating a Custom Clipart LibraryLIVE Q&A #143 – Import an STL File into VCarve and Aspire Version 11.0 and Newer