Introducing The Zero Plane - Part 33 - Vectric For Absolute Beginners
Intro to the Zero Plane - Part 33 - Aspire and VCarve For Absolute Beginners
More down here ↓↓↓ Click SHOW MORE!
This is the 33rd in a series of videos geared toward the person who has never worked with CAD or CAM in the Vectric Software before.
In this video, I’ll introduce the Zero Plane in the Vectric software. I’ll demonstrate a scenario in which a 3D finishing toolpath carves some rough, jagged edges. I’ll show you why the toolpath is carving those edges, then show you how to prevent that from happening by using a Zero Plane. We’ll then calculate a new 3D finishing toolpath and Preview it.
As usual, if you have any comments or questions about anything I covered in this video, please put ‘em in the comment section below.
On Sunday, October 13th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link: https://www.youtube.com/watch?v=ScZEJhMKqDM
Thanks for watching!
__________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the Vcarving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
__________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
__________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Видео Introducing The Zero Plane - Part 33 - Vectric For Absolute Beginners канала Mark Lindsay CNC
More down here ↓↓↓ Click SHOW MORE!
This is the 33rd in a series of videos geared toward the person who has never worked with CAD or CAM in the Vectric Software before.
In this video, I’ll introduce the Zero Plane in the Vectric software. I’ll demonstrate a scenario in which a 3D finishing toolpath carves some rough, jagged edges. I’ll show you why the toolpath is carving those edges, then show you how to prevent that from happening by using a Zero Plane. We’ll then calculate a new 3D finishing toolpath and Preview it.
As usual, if you have any comments or questions about anything I covered in this video, please put ‘em in the comment section below.
On Sunday, October 13th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link: https://www.youtube.com/watch?v=ScZEJhMKqDM
Thanks for watching!
__________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the Vcarving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
__________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
__________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Видео Introducing The Zero Plane - Part 33 - Vectric For Absolute Beginners канала Mark Lindsay CNC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Combine 3D Models - Part 19 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/rIcP0L0jyNI/default.jpg)
![](https://i.ytimg.com/vi/6P8-L9ufdlI/default.jpg)
![Paint and Finish a V Carved Project - CNC For Beginners](https://i.ytimg.com/vi/bZPEaOhzx0s/default.jpg)
![Climb Cut VS Conventional Cut - Part 8 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/MPsGQjjZpKE/default.jpg)
![Intro to the Texturing Toolpath - Part 35 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/1jcyiWOS64M/default.jpg)
![Bitmap Trace and 2 Sided Machining - Part 2 - Design a Shelf Project in VCarve or Aspire](https://i.ytimg.com/vi/D9L5iH-yids/default.jpg)
![Vectric V11 Tutorials | PhotoVCarve Strategy](https://i.ytimg.com/vi/YMIU7IddSSc/default.jpg)
![Creating the Spoilboard Surfacing Toolpath](https://i.ytimg.com/vi/OMy0SMNRFOA/default.jpg)
![State of Oregon V-Carve Clock Project](https://i.ytimg.com/vi/BzAnqoIQ0wk/default.jpg)
![Intro to Ramps and Leads - Part 44 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/qndxWC--rO8/default.jpg)
![Tapered Ball Nose Bits - Part 34 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/89ljoKZnTZo/default.jpg)
![Two Sided Machining 1 - Part 30 - Vectric for the Absolute Beginner](https://i.ytimg.com/vi/qsTdCdelBkg/default.jpg)
![Vectric V10 Tutorials | 2.5D Toolpaths | VCarve Toolpath Guide](https://i.ytimg.com/vi/C-yyODQpYyc/default.jpg)
![Zero and Modeling Planes, Plus Stepover and Plunge Rate - Part 3 - I Answer Your Vectric Questions](https://i.ytimg.com/vi/ILPNA8g46Pc/default.jpg)
![Design a 3D Serving Dish in Vectric VCarve and Aspire](https://i.ytimg.com/vi/M4JNMMG5YL0/default.jpg)
![Reducing 3D Machining Times - Part 27 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/fPOF_UJu5ew/default.jpg)
![Vectric - 3D Shape in a dish](https://i.ytimg.com/vi/txbgWS_JaY4/default.jpg)
![Importing STL Files - Part 20 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/GSkFb-5lXkg/default.jpg)
![Vectric V10 Tutorials | 3D Modeling | Lily Leaf Molding](https://i.ytimg.com/vi/xFpJQjzQvgU/default.jpg)
![Add a Form Tool to the Vectric Tool Database - Part 37 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/42v6KC4UPAg/default.jpg)