How To Restore a Go Kart! DIY Build Guide
#gokart
This is a full in-depth video of restoring a vintage Kenbar Streaker Kart that we bought on Marketplace in rough condition. We take you through all the steps of making it look new again with upgraded parts, fresh paint, and a healthy dose of elbow grease!
-----------PARTS LINKS-----------
(Build Break Repeat is proudly sponsored by GoPowerSports)
22mm Mikuni kit x1: https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header x1: https://www.gopowersports.com/header-pipe-muffler-economy-coleman-200/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
6” Floater Wheel, No Offset, 5/8 Bearing, 13x5-6 Turf Tire x3: https://www.gopowersports.com/13-x-500-6-turf-tire-1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
6” Drive Wheel, No Offset, 5/8 Bearing, 13x5-6 Turf Tire x1: https://www.gopowersports.com/build-your-own-6-tire-assembly/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Clutch, 10T 420 Chain x1: https://www.gopowersports.com/10t-3-4-bore-centrifugal-clutch-41-420/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
54T Sprocket x1: https://www.gopowersports.com/sprocket-48-60-teeth-41-420-chain-dual-pattern/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Drum Brake x1: https://www.gopowersports.com/4-brake-drum-1246-manco/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Pedals x1: https://www.gopowersports.com/vintage-go-kart-pedals/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Cable x1: https://www.gopowersports.com/60-brake-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Band x1: https://www.gopowersports.com/4-manco-brake-band-with-clip/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Band pin x1: https://www.gopowersports.com/brake-band-pin/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cable x1: https://www.gopowersports.com/75-mikuni-go-kart-cable-straight-end/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Engine Mount x1: https://www.gopowersports.com/engine-mount-2/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Steering Wheel x1: https://www.gopowersports.com/steering-wheel/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Self-Tapping Bolt x2: https://www.gopowersports.com/self-tapping-bolt-1-4-governor-hole/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-----PARTS USED (AMAZON AFFILIATE)-----
Orbital Sander- https://amzn.to/3XaEB9r
Krylon Gloss cherry Red - https://amzn.to/3qQH6BE
2k Clearcoat - https://amzn.to/3qOi4mX
Self-Etching Primer – https://amzn.to/3X9vB4o
Gloss Black Enamel - https://amzn.to/3JhT26a
Grip Tape – https://amzn.to/3NySiMi
Vinyl Seat Fabric - https://amzn.to/3PmgvHb
Seat Foam - https://amzn.to/3JgCStA
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
----------TOOLS----------
Tools we use from our channel partners:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------- SOCIAL MEDIA----------
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
----------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat
----------MUSIC ---------
Background Music -Epidemic Sound Library
Outro Song - Jimmi by Andrew Applepie
Intro 0:00-1:18
Disassembly 1:18-2:40
Framework 2:40-6:14
Engine 6:14-12:45
Testing 12:45-15:03
Paint 15:03-17:56
Reassembly 17:56-21:27
Finale 21:27-23:00
Видео How To Restore a Go Kart! DIY Build Guide канала Build Break Repeat
This is a full in-depth video of restoring a vintage Kenbar Streaker Kart that we bought on Marketplace in rough condition. We take you through all the steps of making it look new again with upgraded parts, fresh paint, and a healthy dose of elbow grease!
-----------PARTS LINKS-----------
(Build Break Repeat is proudly sponsored by GoPowerSports)
22mm Mikuni kit x1: https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header x1: https://www.gopowersports.com/header-pipe-muffler-economy-coleman-200/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
6” Floater Wheel, No Offset, 5/8 Bearing, 13x5-6 Turf Tire x3: https://www.gopowersports.com/13-x-500-6-turf-tire-1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
6” Drive Wheel, No Offset, 5/8 Bearing, 13x5-6 Turf Tire x1: https://www.gopowersports.com/build-your-own-6-tire-assembly/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Clutch, 10T 420 Chain x1: https://www.gopowersports.com/10t-3-4-bore-centrifugal-clutch-41-420/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
54T Sprocket x1: https://www.gopowersports.com/sprocket-48-60-teeth-41-420-chain-dual-pattern/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Drum Brake x1: https://www.gopowersports.com/4-brake-drum-1246-manco/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Pedals x1: https://www.gopowersports.com/vintage-go-kart-pedals/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Cable x1: https://www.gopowersports.com/60-brake-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Band x1: https://www.gopowersports.com/4-manco-brake-band-with-clip/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Brake Band pin x1: https://www.gopowersports.com/brake-band-pin/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cable x1: https://www.gopowersports.com/75-mikuni-go-kart-cable-straight-end/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Engine Mount x1: https://www.gopowersports.com/engine-mount-2/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Steering Wheel x1: https://www.gopowersports.com/steering-wheel/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Self-Tapping Bolt x2: https://www.gopowersports.com/self-tapping-bolt-1-4-governor-hole/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-----PARTS USED (AMAZON AFFILIATE)-----
Orbital Sander- https://amzn.to/3XaEB9r
Krylon Gloss cherry Red - https://amzn.to/3qQH6BE
2k Clearcoat - https://amzn.to/3qOi4mX
Self-Etching Primer – https://amzn.to/3X9vB4o
Gloss Black Enamel - https://amzn.to/3JhT26a
Grip Tape – https://amzn.to/3NySiMi
Vinyl Seat Fabric - https://amzn.to/3PmgvHb
Seat Foam - https://amzn.to/3JgCStA
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
----------TOOLS----------
Tools we use from our channel partners:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------- SOCIAL MEDIA----------
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
----------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat
----------MUSIC ---------
Background Music -Epidemic Sound Library
Outro Song - Jimmi by Andrew Applepie
Intro 0:00-1:18
Disassembly 1:18-2:40
Framework 2:40-6:14
Engine 6:14-12:45
Testing 12:45-15:03
Paint 15:03-17:56
Reassembly 17:56-21:27
Finale 21:27-23:00
Видео How To Restore a Go Kart! DIY Build Guide канала Build Break Repeat
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Bolt-On Minibike Swingarm Kit! - Mega Moto 80/105Mini Bike Suspension Upgrade Kit! TrailMaster MB200 InstallRESTORING A GO KART In 10 Minutes! FULL BUILDJeep Cherokee XJ Overlanding Storage System... With a FREEZER!TURBO ROTARY ATV Is Complete!NINJA 250 Swapped Go Kart Revival!Our TURBO ROTARY ATV Rips!TURBOCHARGED ROTARY ATV is Complete! | Ep. 9Putting a Bigger Turbo on our ROTARY ATV! | Rotary ATV ep.8We Blew the Turbo on our ROTARY ATV? | ep.7We Turbocharged our Rotary-Swapped ATV! Rotary ATV Ep.6Our ROTARY POWERED ATV is a Monster! Rotary ATV Part 5Minibike Trike With a Differential is FINISHED!2 Stroke Minibike Revival! Vintage Minibike UpgradesROTARY POWERED ATV FINALLY RUNS! Rotary ATV EP. 4ROTARY SWAPPED ATV BUILD EP.3 - Mounting the Engine and First Drive!RARE ROTARY ENGINE Runs! Rebuild And First Start! | Rotary ATV EP. 2RARE ROTARY ENGINE FROM EBAY! Will it Run? | Rotary ATV EP. 1Driving the Mini "Diff" Trike! (Mistakes were made...)Minibike Trike Build - With a Differential! FULL BUILD