TURBOCHARGED ROTARY ATV is Complete! | Ep. 9

Thank you to G-Pop Shop to helping us with this step of the build, check out their website here!: https://gpopshop.com/
And Their NEW WEBSITE here:
https://www.carbonsealturbo.com/

Use Code “BBR5” at Evolution Power Tools for a discount! Use our link below: http://aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16074
Evolution Metal Chop Saw: https://store.evolutionpowertools.com/products/evosaw380

After blowing the seals in the first iteration of the turbo rotary ATV, we replaced the smaller VZ21 turbocharger with a larger GT15 turbo. We then sent it off to G-Pop Shop to be professionally balanced and machined for carbon seals to prevent oil from being sucked past the journal bearings. This will help us avoid drawing oil into our rotary engine and will make the setup much more reliable! We installed an oil pressure regulator to prevent us from pushing oil past the turbo seals, and so far it's very reliable.
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**

PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
https://amzn.to/3c4is9i
GPS PARTS:
34MM MIKUNI – https://www.gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Oil Reservoir - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Battery – https://www.gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

780 series driven pulley - https://www.gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

780 series driver pulley - https://www.gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Jackshaft Brackets - https://www.gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Jackshaft - https://www.gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Sprocket - https://www.gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

Locking Collar - https://www.gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

1” Lock Collars - https://www.gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

¼” Keystock - https://www.gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

AMAZON AFFILIATE PARTS:
Oil pump - https://amzn.to/3xIDYZI
Exhaust Bend (1.5”) - https://amzn.to/3MDbiFK
Jets - https://amzn.to/3tv7Mq2, https://amzn.to/39e4znZ, https://amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - https://amzn.to/3GSmU6l
Brake Master Cylinder - https://amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protection_helmets/products/show/crystal20/
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
----------MUSIC ---------
Intro/Outro Song - Jimmi by Andrew Applepie
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
----SOCIAL MEDIA-----
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat

Видео TURBOCHARGED ROTARY ATV is Complete! | Ep. 9 канала Build Break Repeat