Putting a Bigger Turbo on our ROTARY ATV! | Rotary ATV ep.8
Thank you to G-Pop Shop to helping us with this step of the build, check out their website here!: https://gpopshop.com/
And Their NEW WEBSITE here:
https://www.carbonsealturbo.com/
Use Code “BBR5” at Evolution Power Tools for a discount! Use our link below: http://aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16074
Evolution Metal Chop Saw: https://store.evolutionpowertools.com/products/evosaw380
After blowing the seals in the first iteration of the turbo rotary ATV, we replaced the smaller VZ21 turbocharger with a larger GT15 turbo. We then sent it off to G-Pop Shop to be professionally balanced and machined for carbon seals to prevent oil from being sucked past the journal bearings. This will help us avoid drawing oil into our rotary engine and will make the setup much more reliable! Thanks for watching!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
https://amzn.to/3c4is9i
GPS PARTS:
34MM MIKUNI – https://www.gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Oil Reservoir - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Battery – https://www.gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driven pulley - https://www.gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - https://www.gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - https://www.gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - https://www.gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - https://www.gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - https://www.gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - https://www.gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - https://www.gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
Oil pump - https://amzn.to/3xIDYZI
Exhaust Bend (1.5”) - https://amzn.to/3MDbiFK
Jets - https://amzn.to/3tv7Mq2, https://amzn.to/39e4znZ, https://amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - https://amzn.to/3GSmU6l
Brake Master Cylinder - https://amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protection_helmets/products/show/crystal20/
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
----------MUSIC ---------
Intro and Outro Song - Jimmi by Andrew Applepie
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
----SOCIAL MEDIA-----
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat
Видео Putting a Bigger Turbo on our ROTARY ATV! | Rotary ATV ep.8 канала Build Break Repeat
And Their NEW WEBSITE here:
https://www.carbonsealturbo.com/
Use Code “BBR5” at Evolution Power Tools for a discount! Use our link below: http://aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16074
Evolution Metal Chop Saw: https://store.evolutionpowertools.com/products/evosaw380
After blowing the seals in the first iteration of the turbo rotary ATV, we replaced the smaller VZ21 turbocharger with a larger GT15 turbo. We then sent it off to G-Pop Shop to be professionally balanced and machined for carbon seals to prevent oil from being sucked past the journal bearings. This will help us avoid drawing oil into our rotary engine and will make the setup much more reliable! Thanks for watching!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
https://amzn.to/3c4is9i
GPS PARTS:
34MM MIKUNI – https://www.gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Oil Reservoir - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Battery – https://www.gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driven pulley - https://www.gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - https://www.gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - https://www.gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - https://www.gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - https://www.gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - https://www.gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - https://www.gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - https://www.gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
Oil pump - https://amzn.to/3xIDYZI
Exhaust Bend (1.5”) - https://amzn.to/3MDbiFK
Jets - https://amzn.to/3tv7Mq2, https://amzn.to/39e4znZ, https://amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - https://amzn.to/3GSmU6l
Brake Master Cylinder - https://amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protection_helmets/products/show/crystal20/
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
----------MUSIC ---------
Intro and Outro Song - Jimmi by Andrew Applepie
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
----SOCIAL MEDIA-----
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat
Видео Putting a Bigger Turbo on our ROTARY ATV! | Rotary ATV ep.8 канала Build Break Repeat
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Bolt-On Minibike Swingarm Kit! - Mega Moto 80/105How To Build a Fast + Reliable GO KART!How To Restore a Go Kart! DIY Build GuideMini Bike Suspension Upgrade Kit! TrailMaster MB200 InstallRESTORING A GO KART In 10 Minutes! FULL BUILDJeep Cherokee XJ Overlanding Storage System... With a FREEZER!TURBO ROTARY ATV Is Complete!NINJA 250 Swapped Go Kart Revival!Our TURBO ROTARY ATV Rips!TURBOCHARGED ROTARY ATV is Complete! | Ep. 9We Blew the Turbo on our ROTARY ATV? | ep.7We Turbocharged our Rotary-Swapped ATV! Rotary ATV Ep.6Our ROTARY POWERED ATV is a Monster! Rotary ATV Part 5Minibike Trike With a Differential is FINISHED!2 Stroke Minibike Revival! Vintage Minibike UpgradesROTARY POWERED ATV FINALLY RUNS! Rotary ATV EP. 4ROTARY SWAPPED ATV BUILD EP.3 - Mounting the Engine and First Drive!RARE ROTARY ENGINE Runs! Rebuild And First Start! | Rotary ATV EP. 2RARE ROTARY ENGINE FROM EBAY! Will it Run? | Rotary ATV EP. 1Driving the Mini "Diff" Trike! (Mistakes were made...)