You won't believe what happens when you etch with a really thick layer of Titanium Dioxide!
When I was figuring out how much TiO2 to put on my tiles for etching, It turned out that 1 coat was more than enough. I have since thinned my mixture and it is working even better.
I have a viewer ask about the tile with two coats. I had kept it but not etched on it. That is what I do in this video. I run a material test on the two coats of TiO2 to see what happens.
I had a mistake in my first try and stopped it while there was still some tile left. The setting was set to 3 passes! I got that corrected and ran another test to get more accurate results.
Here is a link to the TiO2 that I used: https://amzn.to/46WrsFN
(Paid links - As an Amazon Associate CNC @ Home earns commission from qualifying purchases.)
Видео You won't believe what happens when you etch with a really thick layer of Titanium Dioxide! канала CNC AT Home
I have a viewer ask about the tile with two coats. I had kept it but not etched on it. That is what I do in this video. I run a material test on the two coats of TiO2 to see what happens.
I had a mistake in my first try and stopped it while there was still some tile left. The setting was set to 3 passes! I got that corrected and ran another test to get more accurate results.
Here is a link to the TiO2 that I used: https://amzn.to/46WrsFN
(Paid links - As an Amazon Associate CNC @ Home earns commission from qualifying purchases.)
Видео You won't believe what happens when you etch with a really thick layer of Titanium Dioxide! канала CNC AT Home
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Bird house assembly - "They" called it a 3D puzzle.Testing the LC-50 Plus on card stockEasy zero/zero fixture for Atomstack P7You won't believe the detail in this coaster - #PowerToTheMakersMaking It Happen YouTube channel - Part 2 - Tissue box burnWill It Burn? - CrunchDoes burning with air assist help at all?They have WHAT! at the Vacuum center!Customizing a wooden box for a birthday presentWhat to do with the back of a small note padHow to make good templates in LightBurnPuzzle V2 - Can I make my air plane puzzle project work this time?Issues with painted tile etching! Part 2Cribbage Board Card PocketLet's visit Paramount GraniteHow does the fixed focus laser work cutting paper?The Bride and Groom on etched glassShop SafetyCan I stop in the middle of a burn and start there later?Two Cats, a laser, and a camera. Part II2021 The Year In Review at CNC @ Home