FreeCAD 5 simple 3D models, part 17

FreeCAD 5 simple 3D models, part 17
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of five 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)

1.
In this video I drew a ring. To begin, I selected Part design from the Workbench and selected a new file. Then I selected a plane and drew a circle, specifying the distance from the vertical line and the diameter of the circle. After closing, I selected the "Revolution" function, which created a ring for me. The next step was to remove the material with a ball. I used the function "Subtractive sphere" to determine the distance, and after confirmation we could see the hole created by this function. The last step was to remove the material, while I selected the multi-level transform function, in which I first defined the polar pattern and applied the cross-section of the ring, which created depressions on one part around the cross-sectional profile...
2.
In this video, I drew a 3D model of a rotating part with protrusions in Part design, I chose a new file and selected the plane in which I drew the sketch in the next step. I created two circles "Create circle", an inner circle was created on which I entered the necessary dimensions after removing the degrees of freedom, I closed the sketch and used the Pad function to extend 3D into space and I chose the center plane where I started to draw the shape of the protrusion I also used the functions such as the transfer of geometry from the model to the current sketch, but also the display through the selected plane in the section...
3.
In this video I modeled a simple 3D model. I chose Part design as a workbench. On the new sketch, I drew a shape using the Create polyline function. I switched to drawing the radius by repeatedly pressing the letter "M" on the keyboard. I entered the dimension horizontally and the necessary links in the center of the coordinate system, I drew another circle using create Circle and entered the dimensions after closing the sketch, I created a 3D model with the Pad function, on which I selected a surface and selected a new sketch. I used a geometry transfer and drew a rectangle...
4.
In today's video I will show you in software FreeCAD version 0.21.1. how to 3D model I modeled a 3D model of a flat circular plate and proceeded by selecting a new sketch in Part design and drawing a circle, entering the necessary dimensions and using the Pad function to create a 3D model of a circular plate in the New Sketch that I created on the flat surface of the cylinder, I drew a slot and I entered the necessary dimensions. Using the Pocket function, I removed the material from the 3D model..
5.
I modeled a cone. To begin with, I chose Part design and selected a new document, sketch and selected in a plane. For drawing, I used Create polyline, which has the advantage that I don't always have to click to create a new line, but the line automatically connects to the point where the position was confirmed. I created the radius by repeatedly pressing the letter "M" and defined the dimensions of the closed sketch. I placed the sketch along the vertical axis so that in the next step I could rotate it along the vertical axis. I used the Revolution function for the rotation and then marked the lower flat surface and I used the function to create the so-called Thickness shell, I also checked the option to keep the outer dimension of the 3D model the original dimension and entered the dimensions of the shell. I marked the lower flat surface and created a new sketch..
1. 3D model. 00:00
2. 3D model. 01:26
3. 3D model. 03:34
4. 3D model. 05:13
5. 3D model. 07:25

Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania piatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch

Видео FreeCAD 5 simple 3D models, part 17 канала Miri tech workshop