FreeCAD 5 simple 3D models, part 27

FreeCAD 5 simple 3D models, part 27
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of five 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)

1.
To today's tutorial where I will guide you through the process of creating a 3D rotating part using FreeCAD version 0.21.1. In this step-by-step tutorial, I will demonstrate how to model this rotating part using various tools and functions within FreeCAD. To begin, we will select the "Part Design" option and create a new file along with a new sketch ..
2.
To begin with, I select "Part design" and New document - Create body - Create sketch I draw a circle and enter the size using: "Constrain diameter" using the "Pad" function I created a 3D body. I wanted to draw a groove, so I chose a plane that touched the upper part of our 3D component, on the plane I chose "New sketch" and drew the shape of the groove, which I then removed using "Pocket" ..
3.
I have prepared for you a drawing of a part using the rotation technique, which has a cavity inside. in "Part design" I selected a new piece and then selected the XY plane. I drew the shape of the part using "Circle" but I only drew half of the resulting model because I rotated it around the axis ...
4.
In this video, you can see how I draw a 3D part that is solved somewhat spirally, this method could be used, for example, to model a flexible mat. At the beginning of "Part design" there in a new sketch I drew a rectangle "Rectangle" I entered 2 horizontal dimensions of the angle of the radius of the inner side and the radius of the outside ..
5.
In "Part design" I drew a simple 3D model. I drew 2 "Create rectangle" rectangles, the first from the center of the rod from the upper part, because I created a recess, I had to delete the excess "Trim edge" lines. I entered the necessary dimensions and connections to remove all degrees of freedom. Using the "Pad" function, I dragged the sketch into the space and entered the thickness of the piece ..
1. 3D model. 00:00
2. 3D model. 02:06
3. 3D model. 06:22
4. 3D model. 07:53
5. 3D model. 09:11

Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania piatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch

Видео FreeCAD 5 simple 3D models, part 27 канала Miri tech workshop