Subaru Impreza WRX Engine Rebuild - Impreza Pure sound

Welcome to the next episode of the Subaru Impreza build on my wonderfully random channel :)

You can find the links below to most of the products used in this engine restoration.

In my previous video you seen seen me restore the engine bay from a rusty crusty mess into a better than new place for the engine to live. So lets crack on and get the engine rebuilt and running.

First Job on the list was to fit the new rocker cover gaskets, as stated in the video i use a little RTV silicone in the extreme angles around the cams as his is a know area for these gaskets to leak due to the angle not compressing the same as the rest of the flat surfaces of the gasket. once the gaskets are in i fit new rubber washers to the bolts then torque them all up in the correct sequence so as to get even pressure on all the gasket surfaces.

I then moved on to the timing belt cases, its pretty much the same story here new gaskets, washers bolts then torque to spec. I zinc plated and yellow passivated the brackets you see on the left of the casing to add a little bling to the otherwise dull looking plastic.

I then rotate the engine 180 degrees so that i can easily access the underside of the engine to fit the manifolds and engine mounts. The manifolds were mounted with brand new fixings and gaskets to ensure there are no exhaust leaks, The exhaust system is also heat wrapped in titanium heat wrap to try and keep the engine bay temps down and protect the oil filter and sump from excess heat.

Once finished on the underside i rotated the engine back to the top and made a start on fitting the coolant lines,vacuum lines and fitting the air conditioning compressor,alternator and power steering pump.When these items were fitted and torqued down i fitted new intake manifold gaskets with a nice bead of sealing compound to ensure an air tight seal then torqued the intake down to spec.

After that it was just a case of fitting some small gaskets, clips and fitting the fan belts as you can see in the video fitting and tensioning these belts isn't a hard job.

Then came the fun part hooking the engine upto the crane and lowering the engine into the bay for the first time in so many years. I was terrified of scratching any of my lovely new paint but im glad to say the engine went in without any fuss or drama and no damage was done. After this it was a simple case of bolting the gearbox to the engine,bolting the engine mounts,hooking up the electrics,vacuum lines,sensors, adding some fluids and we were ready to turn the key :)

-----------------------------------------------------------------------------------------------------------

A little History

The project in question is the engine bay in my 94 Subaru Impreza WRX. As i can be heard saying in the intro of this video i love impreza's and i wanted a rust free one as all the UK ones suffer from lots of rust issues so in 2004 i imported this car from Japan and it was totally rust free when it arrived all those years ago. It has a couple of blisters here and there now but thats to be expected when living in Scotland.

Anyway im getting off track, I was having lots of fun driving the car at full boost everywhere until 2014 when the thought popped into my head " lets go for more power" so i took the engine out and begun the process of having it all upgraded, better gaskets, race bearings, forged pistons, con rods etc etc then life got in the way and the engine was put to the side and the car was stored in a shed for the past 5 years.

The initial condition of the car looks horrifying but its only a thick layer of dust and crud on it and there is a good layer of carnuaba wax separating all the crud from the paint so a quick pressure wash and she'll be looking good again but for now the focus is on the engine bay and engine.

-----------------------------------------------------------------------------------------------------------
A new addition to my videos from now on will be a water mark and my channel name popping up in random places throughout the video as im getting rather tired of people re-uploading my content as their own i hope you guys understand.

Links to some of the products used in the restoration of this engine and bay-

DEOX C RUST REMOVER -https://amzn.to/2MW9Cft
PARTS WASHER- https://amzn.to/2TmDTVT
BLASTING CABINET- https://amzn.to/33nUj53
U-POL ETCH PRIMER- https://amzn.to/31pAlF8
U-POL 2K PAINT- https://amzn.to/31wCvCK
FLEXIOD GASKET PAPER- https://amzn.to/2MeKK2S
HEAT WRAP-https://amzn.to/2KQNmlL
ENGINE CRANE-https://amzn.to/33SlODW
ENGINE STAND-https://amzn.to/2L7wgyG
RTV SILICONE-https://amzn.to/31WSF8I
HYLOMAR BLUE-https://amzn.to/2TTcY4c

For business inquiries - reallyrandomchannel2017@gmail.com

If you would like to help support the channel i have a Patreon account -https://www.patreon.com/ReallyRandomC...

#Restoration #Subaru#Engine Rebuild

Really Random Channel

Subaru Impreza WRX Engine Rebuild - Impreza Pure sound

Видео Subaru Impreza WRX Engine Rebuild - Impreza Pure sound канала RRC Restoration