BMW E30 Rear Subframe Assembly RESTORATION | BMW E30 325i Sport Restoration E4 S1
In episode 4 of the BMW E30 325i Sport restoration, I restore the rear subframe along with a few things attached to it.
This one really put me to the test. Not only the project in hand but filming it also. Apologises for the dark shots every now and again. It started with battling the old rusty parts off. Lots of tapping and prying was involved. And once it was all off, it was still a nightmare to get apart. I had to get help from friends on several occasions during the process.
Once everything was apart and degreased, I set about pushing the bearing and bushes out. This was stressful, even with a press. Once out, I blasted all of the pieces I was going to restore even the nuts and bolts. The subframe itself and the control arms were given to a friend to take to work and blast using professional blasters. Made my life a lot easier considering I couldn't fit the subframe into my homemade cabinet.
Once everything was free from rust and paint I polished the nuts, bolts and other small pieces and started the long process of zinc electroplating them. This would take me around three days in total, on, off plating when I had time. Whilst I was waiting for things to plate and dry, I realized I had forgotten about the sway bar and quickly de-rusted it with the Onyx 320. I then masked everything ready for paint.
Firstly a coat of etching was added, then high-build primer. That was then sanded back with 500/600 grit sanding pads and Quarts Deep Black (The deepest black I know of) was added. Finally, Quartz lacquer to seal everything in, and make them shine. Once eve had dried it was time to carefully press in the new bushes and bearings. This was achieved by doing the opposite of the removal.
Everything was then put back where it came from restored or new and the restoration was complete. As I said in the video with the car being just a shell, no differential in and fresh springs, shocks, bushings, drop links etc... It will take some time for everything to settle down to the correct ride height.
Thanks for watching and be sure to subscribe with the bell on to be notified of the next episode!
If you would like to send me something to restore, tools to use or anything to support Restore It, please send to:
Restore It Mail Box
PO Box 50
CHATTERIS
PE16 9AZ
Subscribe for Weekly content!
Tools & equpitment used:
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Thanks for watching!
- Disclaimer: I am no professional. I am completely self-taught and would appreciate any feedback, advice or constructive criticism.
I don't add music to these videos so that you can choose to listen to what you like if you would like to.
#BMW #E30 #Restoration
Become a patron to win the Items featured in these videos!
Patreon - https://www.patreon.com/RestoreIt
PayPal Donations - restoreitchannel@gmail.com - If you would like to help towards more tools and projects.
Follow me on Social media to keep up to date with videos and giveaways.
Twitter - https://twitter.com/Restore__It
Facebook- https://www.facebook.com/RestoreItChannel
Instagram - @RestoreItChannel
Patreon - https://www.patreon.com/RestoreIt
Discord - I now also have a discord server if you want to chill with like-minded people and maybe learn something new. - https://discord.gg/vNmCBk9
Видео BMW E30 Rear Subframe Assembly RESTORATION | BMW E30 325i Sport Restoration E4 S1 канала Restore It
This one really put me to the test. Not only the project in hand but filming it also. Apologises for the dark shots every now and again. It started with battling the old rusty parts off. Lots of tapping and prying was involved. And once it was all off, it was still a nightmare to get apart. I had to get help from friends on several occasions during the process.
Once everything was apart and degreased, I set about pushing the bearing and bushes out. This was stressful, even with a press. Once out, I blasted all of the pieces I was going to restore even the nuts and bolts. The subframe itself and the control arms were given to a friend to take to work and blast using professional blasters. Made my life a lot easier considering I couldn't fit the subframe into my homemade cabinet.
Once everything was free from rust and paint I polished the nuts, bolts and other small pieces and started the long process of zinc electroplating them. This would take me around three days in total, on, off plating when I had time. Whilst I was waiting for things to plate and dry, I realized I had forgotten about the sway bar and quickly de-rusted it with the Onyx 320. I then masked everything ready for paint.
Firstly a coat of etching was added, then high-build primer. That was then sanded back with 500/600 grit sanding pads and Quarts Deep Black (The deepest black I know of) was added. Finally, Quartz lacquer to seal everything in, and make them shine. Once eve had dried it was time to carefully press in the new bushes and bearings. This was achieved by doing the opposite of the removal.
Everything was then put back where it came from restored or new and the restoration was complete. As I said in the video with the car being just a shell, no differential in and fresh springs, shocks, bushings, drop links etc... It will take some time for everything to settle down to the correct ride height.
Thanks for watching and be sure to subscribe with the bell on to be notified of the next episode!
If you would like to send me something to restore, tools to use or anything to support Restore It, please send to:
Restore It Mail Box
PO Box 50
CHATTERIS
PE16 9AZ
Subscribe for Weekly content!
Tools & equpitment used:
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Thanks for watching!
- Disclaimer: I am no professional. I am completely self-taught and would appreciate any feedback, advice or constructive criticism.
I don't add music to these videos so that you can choose to listen to what you like if you would like to.
#BMW #E30 #Restoration
Become a patron to win the Items featured in these videos!
Patreon - https://www.patreon.com/RestoreIt
PayPal Donations - restoreitchannel@gmail.com - If you would like to help towards more tools and projects.
Follow me on Social media to keep up to date with videos and giveaways.
Twitter - https://twitter.com/Restore__It
Facebook- https://www.facebook.com/RestoreItChannel
Instagram - @RestoreItChannel
Patreon - https://www.patreon.com/RestoreIt
Discord - I now also have a discord server if you want to chill with like-minded people and maybe learn something new. - https://discord.gg/vNmCBk9
Видео BMW E30 Rear Subframe Assembly RESTORATION | BMW E30 325i Sport Restoration E4 S1 канала Restore It
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BMW E30 Throttle Body Restoration | BMW E30 325i Sport Restoration Project E5 S1BMW E30 Limited Slip Differential RestorationToyota 1C Engine Full Restoration (Toyota 1C 2C 3C Engine Restoration)E30 Fix 15 | 5 Lug Conversion, E36 MaXpeedingRods Coilovers, E46 Big Brakes, Z4 HubsTrain Arrière prêt pour la guerre!!! 💥- E30 Project #6Rear Axle Restoration and Rebuild (Chrysler 8.25)BMW E30 M3 Front and Rear Subframe [Restoration]Back in Service After 16 Years - V12 BMW E31 850i Revival - Project Malaga: Part 2E30 Fix 12 | Aftermarket M-Tech 2 Fiberglass Body Kit InstallBMW E30 Transformation in 10 Minutes!bmw e30 design and developmentHow To Remove The Rear Subframe From A BMW E30BMW E30 Headlight Restoration | BMW E30 325i Sport Restoration E6 S1BMW E30 M20B25 Engine Rebuild Restoration - | Part 9 | Putting It Back Together AgainBMW E30 Output Shaft - Full Restoration | BMW E30 325i Sport Restoration S2 E4BMW E30 Zimmermann Sport Drilled & Vented Brake Disc Kit [Restoration]BMW E30 Front Struts Restoration | BMW E30 325i Sport Restoration S1 E1BMW E30 Front Subframe & Steering Rack Restoration | BMW E30 325i Sport Restoration S1 E2Restoring a BMW E30 M3 EVO2 in 9 minutes!1991 BMW 330iS M54 E30 M Tech 2 Restoration Project