CNC Luthiery - Carbide 3D Shapeoko CNC Guitar Build
Guitar build using the Carbide 3D Shapeoko XXlL CNC Machine.
Specs below:
25-26’’ multi-scale. Parallel fret at the nut
African mahogany neck
Carbon fiber inserts
Spoke-wheel truss rod
Goncalo alves (tigerwood) fretboard
14.5 - 20” conical radius
Luminlay glow in the dark side dots
Sperzel Locking Tuners
Blind fret slots
Jescar stainless steel frets
Stainless steel threaded inserts and bolts
Chambered African Mahogany body
Hipshot bridge
EMG 57/ 66 pickups
1/2” Spalted maple top
5.9 lbs
@markgutierrez
End mill affiliate links:
46348-K for all pockets, cavities and rough passes - https://amzn.to/3kpdId8
46577-K for contour - https://amzn.to/3pqZPim
46299 for those hard to reach spots and the string through holes - https://amzn.to/3eSMF8F
46294-K for ball end finishing passes - https://amzn.to/3nisoN0
2mm cheap bits for screw holes - https://amzn.to/3lrEQt0
.5mm or .6mm cheap bits for fret slots - https://amzn.to/2JRAttp
Видео CNC Luthiery - Carbide 3D Shapeoko CNC Guitar Build канала Mark Gutierrez
Specs below:
25-26’’ multi-scale. Parallel fret at the nut
African mahogany neck
Carbon fiber inserts
Spoke-wheel truss rod
Goncalo alves (tigerwood) fretboard
14.5 - 20” conical radius
Luminlay glow in the dark side dots
Sperzel Locking Tuners
Blind fret slots
Jescar stainless steel frets
Stainless steel threaded inserts and bolts
Chambered African Mahogany body
Hipshot bridge
EMG 57/ 66 pickups
1/2” Spalted maple top
5.9 lbs
@markgutierrez
End mill affiliate links:
46348-K for all pockets, cavities and rough passes - https://amzn.to/3kpdId8
46577-K for contour - https://amzn.to/3pqZPim
46299 for those hard to reach spots and the string through holes - https://amzn.to/3eSMF8F
46294-K for ball end finishing passes - https://amzn.to/3nisoN0
2mm cheap bits for screw holes - https://amzn.to/3lrEQt0
.5mm or .6mm cheap bits for fret slots - https://amzn.to/2JRAttp
Видео CNC Luthiery - Carbide 3D Shapeoko CNC Guitar Build канала Mark Gutierrez
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
CNC carving a violin out of olive wood with the Shapeoko XXLAcacia Guitars Custom Build - CNC Body, Glue Top, Carve Neck (Part 3)DIY "High End" Guitar Neck | Trussrod, Inlays, Frets etc.Kiesel Guitars Buckeye Burl Carved Top CT6 Getting Carved Out on the HAASHammer® CNC DIY-Projekt High-End Jazz-Bass-Gitarre SELBER BAUENIs “Handmade” Really Better? CNC vs. Handmade GuitarDrawing a complete guitar in Fusion360, the extended versionMy CNC Setup Process | Fusion360 and Mach 3 | CNC Bass Guitar3-sided rotary CNC routing with the Shapeoko - Carving a Koi fishYes, You Can 3D Carve a Guitar on the MakerMade M2 (Fingerboard, too?)Custom Guitar Build from scratch (NO SHELF this time)Acacia Guitars Custom Build - FINALE!!!10 Things I’ve learned making my first 10K with my Shapeoko // CNCLP-style, Carved Epoxy Resin River Table Guitar FULL BUILD in 1 videoMaking a Wooden Guitar on a Desktop CNC Router | Laguna ToolsMaking The Gretsch White Falcon Neck | CNC Guitar NeckA new guitar build compilation.The Morinessa.(Full Build)I built a guitar out of a SHELF during lockdown !HANDMADE GUITAR BUILD - Les Paul style guitar with tremolo - homemade guitar build from scratchMUST HAVE purchases for DAY ONE with your new Shapeoko or other hobby CNC.