Drawing a complete guitar in Fusion360, the extended version

This video is an extended version of my previous design video. I was asked to show keystrokes and mouseclicks more clearly. So here it is, my take on drawing a guitar in Fusion360. I've also made small chapters in the video (see below), so it's easier to see when what part is being created.

Do not consider the design and dimensions as 'set in stone'. I'm sure you can design better looking guitars and use other dimensions than I do :-)

I hope you'll find this video helpful! If you have any questions, please let me know in the comments below.
Also, for more info on my DIY CNC machine or other info on drawing in fusion360 visit my website:
https://www.audiohotshot.nl

Contents:
00:00 Introduction
00:39 Disabling Design History (and why I do this)
02:36 Drawing the scalelength
03:46 Drawing the neck (construction planes)
04:42 Drawing the neck (fret 0 to 12)
07:19 Drawing the neck (fret 12 to 24)
08:52 Drawing the neckjoint
14:42 Drawing the fretboard
16:49 Drawing the fretboard with a compound radius
18:39 Drawing the headstock
24:57 Adjusting the tunerholes on the headstock
27:57 Drawing the trussrod
30:58 Drawing the screwholes in the neckjoint
35:11 Placing a canvas on the scalelength
37:00 Drawing the body onto a sketchplane
39:57 Extruding the body to height
40:57 Combining neckjoint and body
42:06 Widening the neckjoint for a better fit
43:09 Drawing the pickups
46:55 Drawing the tremolo on the front
51:14 Adjusting the position of the pickups
52:05 Creating a curved body
55:32 Drawing a comfortzone on the backside
57:38 Drawing the tremolocover
1:02:37 Drawing the tremolocavity
1:04:25 Drawing the electronicscover
1:07:39 Drawing the electronicscavity
1:10:12 Finishing up by making round edges

Check out my website for some more info in machining guitars: https://www.audiohotshot.nl

A link to my previous article about CAM:
https://www.audiohotshot.nl/cnc-machining-guitar-body/

For more info on my machine:
https://www.audiohotshot.nl/howto-how-i-built-my-diy-cnc-machine/
https://www.facebook.com/Audiohotshotblog
https://www.instagram.com/audiohotshot/

Видео Drawing a complete guitar in Fusion360, the extended version канала Audiohotshot