Kent USA How to Clean Acu Rite SENC Linear Glass Scale
How to clean up Acu-Rite SENC Glass Scales
In this video, we will demonstrate how to properly clean your Acu-Rite SENC Glass Scales
Note: The new reader head is backwards compatible with the older model glass scales. However, the older reader head isn’t compatible with the newer model glass scales.
Here are the tools needed:
Needle nose pliers
Cotton swabs
Alcohol pads
1. Remove the end caps on both ends
2. Remove the reader head
3. Remove the plastic shield
4. Clean the glass scale using a pre-moistened alcohol pad. Use a cotton swab to guide it through.
5. Dry up any leftover debris using a dry cotton swab.
6. Clean the sensor on the reader head.
7. Reinstall the plastic shields.
8. Next, re-install the reader head. First, remove both red guide brackets to feed in the reader head without obstruction. Make sure that the tab and the ball socket are in place as shown. You can now feed the reader head through the railing.
9. Once the reader is seated properly, you can now reinstall the guide brackets. Make sure that the correct brackets are installed as labeled. (ie. A-A, 2-2; B-B, 1-1)
10. Lastly, reinstall the end caps.
Видео Kent USA How to Clean Acu Rite SENC Linear Glass Scale канала Kent Industrial USA
In this video, we will demonstrate how to properly clean your Acu-Rite SENC Glass Scales
Note: The new reader head is backwards compatible with the older model glass scales. However, the older reader head isn’t compatible with the newer model glass scales.
Here are the tools needed:
Needle nose pliers
Cotton swabs
Alcohol pads
1. Remove the end caps on both ends
2. Remove the reader head
3. Remove the plastic shield
4. Clean the glass scale using a pre-moistened alcohol pad. Use a cotton swab to guide it through.
5. Dry up any leftover debris using a dry cotton swab.
6. Clean the sensor on the reader head.
7. Reinstall the plastic shields.
8. Next, re-install the reader head. First, remove both red guide brackets to feed in the reader head without obstruction. Make sure that the tab and the ball socket are in place as shown. You can now feed the reader head through the railing.
9. Once the reader is seated properly, you can now reinstall the guide brackets. Make sure that the correct brackets are installed as labeled. (ie. A-A, 2-2; B-B, 1-1)
10. Lastly, reinstall the end caps.
Видео Kent USA How to Clean Acu Rite SENC Linear Glass Scale канала Kent Industrial USA
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Installing Acu Rite ScalesM-DRO Guide to the Operation of Optical Linear Encoders, also known as Glass Scale Digital ReadoutsCutting glass encoder rail.Part 1 - DRO Linear Scale Reader Repair Project (Jenix)Linear Encoders for Machine Tools | ENCutting My DRO scale . X axis fitting to the Warco WM16B part 1Help Request on old Accu-Rite Glass ScalesKent USA Acu-rite TURNPWR Control for CNC LathesKent USA CNC Knee Mill with Acu-Rite G2 Safety FeaturesHow an Encoder WorksDiscover the #1 advantage of magnetic digital readout scales - length!take apart glass scale linear and cutting glass scale linearA Hack Job - Cutting Glass DRO ScaleDigital Readout Mill Tutorial Acu-Rite Vue -#5minFriday - #6DRO digital readout -linear scale- repair for $0,1Almost Accu-RiteDitron Reeson D80 DRO scale pinout incompatible fixHow to Install a Lathe DRO Kit. Manual Lathe 2 Axis Digital Read Out.Cutting a glass DRO scaleKent USA TRL 1340 Manual Precision Lathe