Building the Holybro X650 with Jetson Baseboard and Pixhawk 6X Pro
A long one!
This is the final tune I came up with, it flies pretty well on this - https://www.dropbox.com/scl/fi/5kz8nbjprchriwtipg6jr/HolybroX650-Tuned4.5-Pixhawk6XPro.param?rlkey=rs3l8gbn6bwdz81e16fdz3wn2&dl=0
Видео Building the Holybro X650 with Jetson Baseboard and Pixhawk 6X Pro канала Andy Piper
This is the final tune I came up with, it flies pretty well on this - https://www.dropbox.com/scl/fi/5kz8nbjprchriwtipg6jr/HolybroX650-Tuned4.5-Pixhawk6XPro.param?rlkey=rs3l8gbn6bwdz81e16fdz3wn2&dl=0
Видео Building the Holybro X650 with Jetson Baseboard and Pixhawk 6X Pro канала Andy Piper
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
AM32 on ArduPilot Part 2 - Flashing AM32 Bootloader and Firmware
Gecko 3" Acro
AM32 on ArduPilot Part 6 - Zero to Acro
Holybro X500v2 Build Video 7 - First Flight Pre-Flight Checks
Cool New Features in ArduPilot 4.4 (that I worked on!)
ArduCopter 6" Race Build Video 10 - Initial Configuration - Amilcar Soup to Nuts
ArduCopter 6" Race Build Video 2 - Badger Frame Assembly
ArduCopter 6" Race Build Video 3 - Antenna Mounting
Holybro X500v2 Build Video 5 - ELRS Mode Switch Configuration
ArduCopter 2023 Christmas Build Video 1 - 6" Racer - Intro and Unboxing
Road Farm - Tadpole Flips
ArduCopter 7" LR Build Video 21 - FPV and Acro Tuning
ArduCopter 7" LR Build Video 22 - Acro Flips and Rolls, Antenna Adjustments
GPS Speed Test Part 4 - F9P Micro vs M10 Micro
ArduCopter 6" Race Build Video 4 - Soldering the ESC Pigtail
ATC_THR_MIX_MAN and Air Mode
ArduCopter 7" LR Build Video 7 - Peripheral Configuration
ArduCopter Rekon 5" Build Video 3 - KakuteH7Mini Installation and Initial Setup
Hexsoon 650 Build Video 5 - LED configuration and motor testing
ArduCopter 6" Race Build Video 16 - First Acro Flight Post-re-tune - FPV View