TSP #23 - Tutorial on the Design and Characterization of Class-B and AB Amplifiers
In this episode Shahriar continues his investigation of discrete Bipolar amplifier design. The advantages and disadvantages of Class-A amplifiers are explained. The conceptual schematic of a Class-B amplifier is presented which leads to the introduction of Class-AB amplifier circuit to overcome the 'dead-zone' impairment of a push-pull Class-B design. To further improve the Class-AB amplifier and lower its input impedance, a final Class-A followed by Class-AB amplifier is presented The component parameters are calculated and the schematics is explained in detail. All circuits are then implemented on a breadboard and tested both in the time domain and frequency domain. All schematics can be downloaded from The Signal Path website.
Please note that in the schematic diagram the diode D1 is backwards! In the measured circuit the diode is placed correctly which is why the measurement results are correct.
The Signal Path Blog
http://www.TheSignalPath.com
Видео TSP #23 - Tutorial on the Design and Characterization of Class-B and AB Amplifiers канала The Signal Path
Please note that in the schematic diagram the diode D1 is backwards! In the measured circuit the diode is placed correctly which is why the measurement results are correct.
The Signal Path Blog
http://www.TheSignalPath.com
Видео TSP #23 - Tutorial on the Design and Characterization of Class-B and AB Amplifiers канала The Signal Path
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![TSP #15 - Tutorial on the Theory, Design and Characterization of a Single Transistor BJT Amplifier](https://i.ytimg.com/vi/Y2ELwLrZrEM/default.jpg)
![Understanding Amplifier Class A & Class AB](https://i.ytimg.com/vi/Aa8Yb4VIw8w/default.jpg)
![How Colpitts Oscillators Work - DC To Daylight](https://i.ytimg.com/vi/Em4a9pKRb2g/default.jpg)
![Wien Bridge Oscillator - Don't Use Lame Parts](https://i.ytimg.com/vi/vBsSASge7ls/default.jpg)
![EEVblog #629 - How To Design a Microphone Preamplifier](https://i.ytimg.com/vi/niZizzHBanA/default.jpg)
![Class D Amplifier Tutorial!](https://i.ytimg.com/vi/O1UagNkcxi4/default.jpg)
![](https://i.ytimg.com/vi/KVtz9zTDEhQ/default.jpg)
![#113: Basics of Transistor bias point and the class of amplifier operation](https://i.ytimg.com/vi/c6cmkm3UPUI/default.jpg)
![Designing Power MOSFET Circuits - Circuit Tips and Tricks](https://i.ytimg.com/vi/56p3_aORiJ0/default.jpg)
![TSP #133 - Keysight UXR 110GHz BW, 256GS/s, 10-bit Real-Time Oscilloscope Teardown & Experiments](https://i.ytimg.com/vi/DXYje2B04xE/default.jpg)
![Push-Pull Pair - Class B, Class AB and Class A operation](https://i.ytimg.com/vi/S7jrirsfkNw/default.jpg)
![How to make an audio amplifier using LM386 IC part 1 ( breadboard version)](https://i.ytimg.com/vi/xTTv8Xko2Ss/default.jpg)
![DIY Class D Audio Amplifier](https://i.ytimg.com/vi/3dQjIeYoIdM/default.jpg)
![TNP #16 - Teardown, Repair & Analysis of a few mm-Wave (26GHz - 40GHz) Amplifier Modules](https://i.ytimg.com/vi/nOinCBAf1MA/default.jpg)
![TSP #203 - Teardown, Upgrade & Experiments with an Agilent 3400B High Dynamic-Range RMS Voltmeter](https://i.ytimg.com/vi/NfxY74W7rNY/default.jpg)
![TSP #8 - Tutorial on Linear and Non-linear Circuits](https://i.ytimg.com/vi/CK0zl34nZJc/default.jpg)
![TNP #11 - Teardown & Analysis of a 75-110GHz (W-Band) Waveguide mm-Wave Balanced Mixer Module](https://i.ytimg.com/vi/YgVh_rSbP0w/default.jpg)
![32. Multistage Transistor Amplifiers](https://i.ytimg.com/vi/FbdZ46VdTjE/default.jpg)
![Transistor Amplifiers - Class A, AB, B, & C Circuits](https://i.ytimg.com/vi/0e_OUyGCaBs/default.jpg)
![Class AB Audio Amplifier](https://i.ytimg.com/vi/-fIpj2eHL0k/default.jpg)