EEVblog #629 - How To Design a Microphone Preamplifier
Part 7 of Microphone Technology with Doug Ford, former head designer at Rode Microphones.
This video Doug takes you through the design of the Rode NT3 and NT1000 microphone designs.
There is a ton of stuff in here:
Closed loop unity gain JFET and bipolar follow circuits.
Bootstrapping out miller capacitance.
JFET biasing.
How to eliminate expensive high value resistors.
How to add a bridged-T network to add marketing "pizazz" to a microphone.
How to stop oscillation in closed loop systems.
How to test and design closed loop systems for stability.
Dominate pole compensation.
Traps for young players in power amplifier stability.
How circuits with capacitive loads oscillate.
Emitter degeneration.
Parasitic inductances and their effects.
How to design a low noise and ultra high dynamic range valve based microphone preamplifier.
Microphone power supplies.
And how to design an amplified zener current source.
All other videos in this series are HERE: https://www.youtube.com/playlist?list=PLvOlSehNtuHv98KUcud260yJBRQngBKiw
Forum HERE: http://www.eevblog.com/forum/blog/eevblog-629-how-to-design-a-microphone-preamplifier/
EEVblog Main Web Site:
http://www.eevblog.com
EEVblog Amazon Store:
http://astore.amazon.com/eevblogstore-20
Donations:
http://www.eevblog.com/donations/
Projects:
http://www.eevblog.com/projects/
Electronics Info Wiki:
http://www.eevblog.com/wiki/
Видео EEVblog #629 - How To Design a Microphone Preamplifier канала EEVblog
This video Doug takes you through the design of the Rode NT3 and NT1000 microphone designs.
There is a ton of stuff in here:
Closed loop unity gain JFET and bipolar follow circuits.
Bootstrapping out miller capacitance.
JFET biasing.
How to eliminate expensive high value resistors.
How to add a bridged-T network to add marketing "pizazz" to a microphone.
How to stop oscillation in closed loop systems.
How to test and design closed loop systems for stability.
Dominate pole compensation.
Traps for young players in power amplifier stability.
How circuits with capacitive loads oscillate.
Emitter degeneration.
Parasitic inductances and their effects.
How to design a low noise and ultra high dynamic range valve based microphone preamplifier.
Microphone power supplies.
And how to design an amplified zener current source.
All other videos in this series are HERE: https://www.youtube.com/playlist?list=PLvOlSehNtuHv98KUcud260yJBRQngBKiw
Forum HERE: http://www.eevblog.com/forum/blog/eevblog-629-how-to-design-a-microphone-preamplifier/
EEVblog Main Web Site:
http://www.eevblog.com
EEVblog Amazon Store:
http://astore.amazon.com/eevblogstore-20
Donations:
http://www.eevblog.com/donations/
Projects:
http://www.eevblog.com/projects/
Electronics Info Wiki:
http://www.eevblog.com/wiki/
Видео EEVblog #629 - How To Design a Microphone Preamplifier канала EEVblog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
EEVblog #602 - Introduction to MicrophonesHistory & Evolution of Mic Preamplifier Circuits - Peter GaskellTransistor preamp circuit DIYNE5532 Op amp. Pre-AmpTSP #23 - Tutorial on the Design and Characterization of Class-B and AB AmplifiersEEVblog #908 - Zener DiodesVoice-over Microphone || DIY or BuyEEVblog #859 - Bypass Capacitor TutorialTutorial: How to design a transistor circuit that controls low-power devicesEEVBlog #1116 - How to Remove Power Supply RippleWhat makes Neve preamps so great? Neve clone teardownCommon Emitter Amplifier - Detailed Walkthrough - Simply PutEEVblog #616 - How Microphone Phantom Powering WorksEEVblog #600 - OpAmps Tutorial - What is an Operational Amplifier?EEVblog #354 - CityRail PA Amp Teardown32. Multistage Transistor AmplifiersEEVblog #490 - Peak Detector CircuitKF5OBS #49: Microphone PreamplifierMic Preamp Live PCB Layout