Q&A | Scarf Joint Jig, Choosing Top Wood for a Parlor, Using Slotted or Unslotted Bridge Pins...

In this episode of DIY Guitar Making, I answer YOUR questions!

Questions/Topics:
- Can backs be flatsawn?
- a miter box design for cutting scarf joints
- Best wood bindings to replace white plastic bindings
- Best topwood for a parlor size instrument
- using slotted or unslotted bridge pins
- building a light box/ light box alternatives
- the 14th fret hump
- sourcing backstrip material
- fixing soundboard tearout along the binding edge
- lint free cloth in the Netherlands
- flatsawn maple
- The 'Best Guitar Show' in Altoona, Pennsylvania, February 25th

🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/

🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/

Видео Q&A | Scarf Joint Jig, Choosing Top Wood for a Parlor, Using Slotted or Unslotted Bridge Pins... канала DIY Guitar Making