Woodturning - The Dragon vs Knight
Resin casting a dragon diorama using stencil art shapes cut from sapele wood. The use of stencil art gives greater definition to silhouettes used previously and can generate intricate and beautiful dioramas set in epoxy resin.
This concept is still work in progress and the use of a pressure pot really helps to avoid bubbles in the epoxy resin, but getting the intensity of the alcohol ink is still a challenge. Also using a capped vessel after the initial pour can help eliminate trapped air bubbles too. The curvature of the resin bowl will affect how well the pieces can be positioned close to each other and a little creativity is needed for smaller diameter bowls. Whatever you do, don't forget your mold release otherwise you'll have a battle to get the piece out after casting.
This video shows the steps needed to construct a resin bowl diorama. It might be easier than you think and a potentially good step in woodturning for beginners. Though perhaps one of my earlier videos would be a better stepping stone. Please check out my wood turning resin playlist.
This piece was made on behalf of Hope Woodwork, a charity that uses woodworking to help adults back to work, and is available for sale on Hope Woodwork's Etsy marketplace. All Etsy sales go towards supporting the charity. http://www.etsy.com/uk/shop/HopeWoodwork
For commissioned work, please email me or contact me through: http://www.hopewoodwork.co.uk/
Please consider using the affiliate links below to help support this channel. If you would like Amazon links for your own country, please contact me. Greatly appreciated!
#resinbowl #stencilart #diorama #resinart #raywhitby
Timeline - Resin casting a dragon diorama
0:00 Cutting stencil art pieces
2:22 Gluing pieces to column
4:54 Shaping the piece to fit the mold
5:59 Casting the resin
7:26 Demolding resin art
8:13 Woodturning stencil art
11:53 Finishing the art
14:01 Final polish
16:00 Gallery Dragon vs Knight Diorama resin bowl
🔴 Please like, subscribe and comment
THINGS YOU NEED TO KNOW
========================
Disclaimer:
We want you to enjoy your woodwork experience, but please be advised that viewers who use this video and rely on any information do so at their own risk. You must take on the responsibility for your own safety.
Видео Woodturning - The Dragon vs Knight канала Ray Whitby
This concept is still work in progress and the use of a pressure pot really helps to avoid bubbles in the epoxy resin, but getting the intensity of the alcohol ink is still a challenge. Also using a capped vessel after the initial pour can help eliminate trapped air bubbles too. The curvature of the resin bowl will affect how well the pieces can be positioned close to each other and a little creativity is needed for smaller diameter bowls. Whatever you do, don't forget your mold release otherwise you'll have a battle to get the piece out after casting.
This video shows the steps needed to construct a resin bowl diorama. It might be easier than you think and a potentially good step in woodturning for beginners. Though perhaps one of my earlier videos would be a better stepping stone. Please check out my wood turning resin playlist.
This piece was made on behalf of Hope Woodwork, a charity that uses woodworking to help adults back to work, and is available for sale on Hope Woodwork's Etsy marketplace. All Etsy sales go towards supporting the charity. http://www.etsy.com/uk/shop/HopeWoodwork
For commissioned work, please email me or contact me through: http://www.hopewoodwork.co.uk/
Please consider using the affiliate links below to help support this channel. If you would like Amazon links for your own country, please contact me. Greatly appreciated!
#resinbowl #stencilart #diorama #resinart #raywhitby
Timeline - Resin casting a dragon diorama
0:00 Cutting stencil art pieces
2:22 Gluing pieces to column
4:54 Shaping the piece to fit the mold
5:59 Casting the resin
7:26 Demolding resin art
8:13 Woodturning stencil art
11:53 Finishing the art
14:01 Final polish
16:00 Gallery Dragon vs Knight Diorama resin bowl
🔴 Please like, subscribe and comment
THINGS YOU NEED TO KNOW
========================
Disclaimer:
We want you to enjoy your woodwork experience, but please be advised that viewers who use this video and rely on any information do so at their own risk. You must take on the responsibility for your own safety.
Видео Woodturning - The Dragon vs Knight канала Ray Whitby
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Woodturning - Nativity DioramaWoodturning a Torus - A World Saving TributeHow to Make an Electric Guitar using Transparent Patterned PlywoodWoodturning - Resin Coasters with Cinnamon SticksWoodturning - The Best Aroma - Cinnamon SticksHow to Make Transparent Patterned PlywoodWoodturning - Samurai WarriorsWoodturning - LOVEHow to Use the Ortur YRR 2.0 for Rotary Laser CuttingWoodturning Mountain Dew from Epoxy ResinHow to Make a 3D Jigsaw Puzzle using Rotary Laser CuttingWoodturning HateWoodturning - Ugly FirewoodWoodturning - The Ultimate TETRIS TrophyWoodturning a Torus - Amazing Woodturning TechniquesWoodturning - Battenberg Baseball BatWoodturning Cherry Crotch Cross - The Rorschach Test BowlWoodturning - BowtiesWoodturning - Cinnamon SticksWoodturning - Segmented Transparent Patterned Plywood