Woodturning a resin art clock - a new woodworking cut!
Woodturning a resin art clock, using oak pieces and epoxy resin as part of the January Clock Challenge 2021 set by Huw of Wooden it be Nice. To get the triangular pieces to form a rim, I found a new woodworking cut!
Innovation in woodworking may be few and far between. Many of the techniques have been developed over the previous centuries, but even in the 21st Century, new woodworking joints can be developed! I know it probably exists in mathematics, but never seen in woodworking.
This project had a major challenge, other than getting it done in time! Trying to form the rim of the wall clock using acute triangular pieces as building blocks, where you cannot use a compound cut on the triangles to form a seamless cylinder. Strange thing is I could not find the name of such a cut anywhere. Looks like no-one has tried to do this. If that's the case then the cut should be called a radially aligned varying bevel angle cut. Okay the name needs work.
In this video I show how to achieve a near seamless cylinder from acute triangular pieces, and space them to allow the void to be filled with epoxy resin. A custom resin mold was needed for the wall clock rim. The piece is woodturned on the lathe. The centre face of the resin clock is much easier to make. With the added LED strip lights, the final piece comes alive as a futuristic geometric wall clock.
Other participants in the challenge can be found here: https://www.youtube.com/playlist?list=PL6wxCkEliPLQ9Epntc59hSNHvFAFxoY-m
I hope you like this video and will share it with others. Click on the Closed Captions CC button for silent commentary.
This piece was made on behalf of Hope Woodwork, a charity that uses woodworking to help adults back to work, and is available for sale on Hope Woodwork's Etsy marketplace. All Etsy sales go towards supporting the charity. www.etsy.com/uk/shop/HopeWoodwork
For commissioned work, please email me or contact me through: www.hopewoodwork.co.uk/
If you have any queries about the items used in the making of this wall clock, please comment. If you would like Amazon links for your own country, please contact me. Greatly appreciated!
🔴 Please like, subscribe and comment
#wallclock #resinart #raywhitby #riverclock #resinwoodturning
Timeline - Woodturning a resin art clock - a new woodworking cut!
0:00 Preparing the triangular pieces
0:30 Laying out the clock face
2:07 Making the resin mold
2:56 An ingenious bevel cut
4:14 Laying out the cylinder
5:48 Preparing the other resin mold
6:17 Mixing and pouring epoxy resin
8:07 Demolding cured epoxy resin
8:29 Woodturning the wall clock rim
11:21 Shaping the resin clock face
12:42 Repairing air bubbles in resin
13:43 Woodturning a recess on the rim
14:59 Final sanding and polishing
15:24 Wall clock assembly
16:54 Attaching LED strip lights
17:28 Gallery
THINGS YOU NEED TO KNOW
========================
Disclaimer:
We want you to enjoy your woodwork experience, but please be advised that viewers who use this video and rely on any information do so at their own risk. You must take on the responsibility for your own safety.
Видео Woodturning a resin art clock - a new woodworking cut! канала Ray Whitby
Innovation in woodworking may be few and far between. Many of the techniques have been developed over the previous centuries, but even in the 21st Century, new woodworking joints can be developed! I know it probably exists in mathematics, but never seen in woodworking.
This project had a major challenge, other than getting it done in time! Trying to form the rim of the wall clock using acute triangular pieces as building blocks, where you cannot use a compound cut on the triangles to form a seamless cylinder. Strange thing is I could not find the name of such a cut anywhere. Looks like no-one has tried to do this. If that's the case then the cut should be called a radially aligned varying bevel angle cut. Okay the name needs work.
In this video I show how to achieve a near seamless cylinder from acute triangular pieces, and space them to allow the void to be filled with epoxy resin. A custom resin mold was needed for the wall clock rim. The piece is woodturned on the lathe. The centre face of the resin clock is much easier to make. With the added LED strip lights, the final piece comes alive as a futuristic geometric wall clock.
Other participants in the challenge can be found here: https://www.youtube.com/playlist?list=PL6wxCkEliPLQ9Epntc59hSNHvFAFxoY-m
I hope you like this video and will share it with others. Click on the Closed Captions CC button for silent commentary.
This piece was made on behalf of Hope Woodwork, a charity that uses woodworking to help adults back to work, and is available for sale on Hope Woodwork's Etsy marketplace. All Etsy sales go towards supporting the charity. www.etsy.com/uk/shop/HopeWoodwork
For commissioned work, please email me or contact me through: www.hopewoodwork.co.uk/
If you have any queries about the items used in the making of this wall clock, please comment. If you would like Amazon links for your own country, please contact me. Greatly appreciated!
🔴 Please like, subscribe and comment
#wallclock #resinart #raywhitby #riverclock #resinwoodturning
Timeline - Woodturning a resin art clock - a new woodworking cut!
0:00 Preparing the triangular pieces
0:30 Laying out the clock face
2:07 Making the resin mold
2:56 An ingenious bevel cut
4:14 Laying out the cylinder
5:48 Preparing the other resin mold
6:17 Mixing and pouring epoxy resin
8:07 Demolding cured epoxy resin
8:29 Woodturning the wall clock rim
11:21 Shaping the resin clock face
12:42 Repairing air bubbles in resin
13:43 Woodturning a recess on the rim
14:59 Final sanding and polishing
15:24 Wall clock assembly
16:54 Attaching LED strip lights
17:28 Gallery
THINGS YOU NEED TO KNOW
========================
Disclaimer:
We want you to enjoy your woodwork experience, but please be advised that viewers who use this video and rely on any information do so at their own risk. You must take on the responsibility for your own safety.
Видео Woodturning a resin art clock - a new woodworking cut! канала Ray Whitby
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Woodturning Resin Bowl and Sapele Flying Dragon and Castle Silhouette Diorama Resin ArtHow to make samurai warriors diorama / epoxy resinWoodturning a coca cola canHow to make transparent patterned plywoodWoodturning a Pepsi can / Epoxy resin art dioramaResin casting a dragon diorama / resin artTop woodturning projects for 2022Woodturning bow ties from chaos to vaseWoodturning the helix - The impossible segmented vaseWoodturning cinnamon sticks into a 3 corner bowlWoodturning - The Worlds Most Expensive WoodA simple woodturning project with resin / LOVE Bowl from Walnut and Epoxy ResinMaking Segmented Wood Nightstands - WoodworkingSegmented woodturning transparent patterned plywoodWoodturning - a tree that swallowed a fishHow to make a resin dragon egg with no latheWoodturning Minecraft Diorama Bowl / Diamond Sword and Pickaxe / Woodturning Epoxy Resin ArtWoodturning DIY plywoodWoodturning the goblet - star anise and epoxy resin