How to drop from 106C to 74C with 1mm COPPER shim - RTX 3080 Founders Edition - Better than 1.5mm?

QUICK & SIMPLE step-by-step guide modding a BRAND NEW RTX 3080 Founders Edition with Copper Shims and Thermal Pads to find the best ultimate solution!
- In this video 1mm Copper Shims/Plates in combination with 0.5mm Thermal Pads are used.
Temperature dropped from 106C (fans at 100%) to 74C (fans at 74%)
(Temperatures last updated on 11/04/22) (fan speed & temperatures may vary from what I say in this video due to improved airflow)

- On a previous RTX 3080 Founders Edition (not in this video) 1.5mm Copper Shims/Plates were used instead. (WITHOUT Thermal Pads)
Temperature dropped from 104C (fans at 100%) to 68C (fans at 73%)
(Temperatures last updated on 11/04/22) (fan speed & temperatures may vary from what I say in this video due to improved airflow)
1) Which one is the better result in your opinion?
2) Have you tried this before?
3) Leave a comment with your experience and let me know.

Thanks for watching!

---

Disclaimer:
This video is for entertainment purpose only. I'm NOT sponsored, endorsed or affiliated with any of the brands you may see or not see in this video.
This video is based on my own research, results may vary and I do not guarantee any of the results/informations I got from this experiment. As such, you are responsible for any modification/damage you may cause on your own hardware and I will not in any way or case responsible for your doing. Always do your own research. Thank you :)

Видео How to drop from 106C to 74C with 1mm COPPER shim - RTX 3080 Founders Edition - Better than 1.5mm? канала DAV TECH LAB